Hello,
I am trying to migrate a program for my folks called AdPlanner 1.1 from a Macintosh 7200/120 to SheepShaver on an OSX Lion computer. I'm able to get 7.5.3 all running nicely, but when I start the program, I get the message "Could not configure the output port". Google has been no help in this regard. Is there something additional I need to do or emulate to get this to work? I used a quadro rom and 68040 processor settings in basilisk as well with the same result.
Any thoughts or pointers in the right direction would be great. Thanks.'
AdPlanner 1.1 stops with "failed to configure output port"
Moderators: Cat_7, Ronald P. Regensburg, ClockWise
- Ronald P. Regensburg
- Expert User
- Posts: 7835
- Joined: Thu Feb 09, 2006 10:24 pm
- Location: Amsterdam, Netherlands
Re: AdPlanner 1.1 stops with "failed to configure output por
Difficult to tell what could be the issue. I do not know AdPlanner. What does AdPlanner do?
Three thoughts/questions:
1. What could be the "port" mentioned in the error message? Could it be a port that your Power Macintosh 7200 and earlier Macs have and SheepShaver has not, like serial ports?
2. I noticed the copyright date 1990 in the image. Isn't the application 68k? In that case it may run better in BasiliskII that emulates a 68k machine.
3. Is the software installed correctly (not by just copying the application file from your old machine)?
Three thoughts/questions:
1. What could be the "port" mentioned in the error message? Could it be a port that your Power Macintosh 7200 and earlier Macs have and SheepShaver has not, like serial ports?
2. I noticed the copyright date 1990 in the image. Isn't the application 68k? In that case it may run better in BasiliskII that emulates a 68k machine.
3. Is the software installed correctly (not by just copying the application file from your old machine)?
Re: AdPlanner 1.1 stops with "failed to configure output por
I've tried it in basilisk as well with no luck. Adplanner is an advertising layout program that my folks still use to this day to lay out portions of the newspaper, as no better program has come along since.
The app was installed properly, and works fine on the older machine, so it is definitely a tricky one. Just curious if there was some easy thing I missed. I set it up in Basilisk as well with no luck.
The app was installed properly, and works fine on the older machine, so it is definitely a tricky one. Just curious if there was some easy thing I missed. I set it up in Basilisk as well with no luck.
Re: AdPlanner 1.1 stops with "failed to configure output por
Hi,
Is there some ReadMe or other documentation that provides you with the system requirements? Or a Help file?
Best,
Cat_7
Is there some ReadMe or other documentation that provides you with the system requirements? Or a Help file?
Best,
Cat_7
-
- Forum All-Star
- Posts: 1726
- Joined: Tue Oct 14, 2008 12:12 am
Re: AdPlanner 1.1 stops with "failed to configure output por
Have you set up a printer, and printed successfully to it from some other application (SimpleText, or something else)?
There are instructions for printing from SheepShaver in other threads in this forum.
Also, check your private messages.
There are instructions for printing from SheepShaver in other threads in this forum.
Also, check your private messages.