SheepShaver-Crashes at Start.
Moderators: Cat_7, Ronald P. Regensburg, ClockWise
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
SheepShaver-Crashes at Start.
Hi!
So I have downloaded .iso of Mac OS 9 and a ROM File for a SheepShaver. After setting it up I tried to run it. When I double Click it,it says that "SheepShaver has stopped working". I tried changing a ROM file and a Hard Disk,but nothing worked. But when Im running it without any Volumes,it starts normally with Blank Floppy at the center.And a Hard Disk is in .img because SheepShaver GUI is not making me a .hfv file. When im at Volumes and Im clicking Create,it shows litte window where I have to select size of it and a name. I call it MacintoshHD.hfv. When I hitted OK,It probbly doesn't create it. Nothing shows at Volumes.
My Laptop is Acer TravelMate 2430
Celeron 1.5Ghz
2GB RAM
SiS Mirage 64MB
Windows 7 Professional SP1
Here is this popup and my SheepShaver Config:
So I have downloaded .iso of Mac OS 9 and a ROM File for a SheepShaver. After setting it up I tried to run it. When I double Click it,it says that "SheepShaver has stopped working". I tried changing a ROM file and a Hard Disk,but nothing worked. But when Im running it without any Volumes,it starts normally with Blank Floppy at the center.And a Hard Disk is in .img because SheepShaver GUI is not making me a .hfv file. When im at Volumes and Im clicking Create,it shows litte window where I have to select size of it and a name. I call it MacintoshHD.hfv. When I hitted OK,It probbly doesn't create it. Nothing shows at Volumes.
My Laptop is Acer TravelMate 2430
Celeron 1.5Ghz
2GB RAM
SiS Mirage 64MB
Windows 7 Professional SP1
Here is this popup and my SheepShaver Config:
Re: SheepShaver-Crashes at Start.
You last screenshots seems to suggest you have not set the path to the rom file.
Use the browse button to find and select the rom file and save the preferences.
Best,
Cat_7
Use the browse button to find and select the rom file and save the preferences.
Best,
Cat_7
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
I selected a path for it and nothing happened. Still says that it Stopped Working.
Re: SheepShaver-Crashes at Start.
Please use a text editor (e.g. notepad) to check you sheepshaver_prefs file and make sure both these lines are present:
ignoresegv true
ignoreillegal true
Best,
Cat_7
ignoresegv true
ignoreillegal true
Best,
Cat_7
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
Still I edited and nothing. I also download oldest Sheep Shaver 2.3 and still nothing.
Re: SheepShaver-Crashes at Start.
Can you paste your prefs in a reply?
Best,
Cat_7
Best,
Cat_7
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
Here you are:
disk C:\Users\Olaf Stręk\Desktop\SheepShaver\OS9.img
extfs
screen win/640/480
windowmodes 3
screenmodes 63
seriala COM1
serialb COM2
rom C:\Users\Olaf Stręk\Desktop\SheepShaver\Mac OS ROM
bootdrive 0
bootdriver 0
ramsize 134217728
frameskip 8
gfxaccel true
nocdrom false
nonet false
nosound false
nogui false
noclipconversion false
ignoresegv true
ignoreillegal true
jit true
jit68k false
keyboardtype 5
keycodes false
mousewheelmode 1
mousewheellines 3
ignoresegv true
idlewait true
keycodes false
mousewheelmode 1
mousewheellines 3
enableextfs false
debugextfs false
extdrives CDEFGHIJKLMNOPQRSTUVWXYZ
pollmedia false
etherpermanentaddress true
ethermulticastmode 0
routerenabled false
ftp_port_list 21
portfile0 C:\B2TEMP0.OUT
portfile1 C:\B2TEMP1.OUT
Re: SheepShaver-Crashes at Start.
Hi,
You get a blinking question mark in the SheepShaver window when you have no disks set?
Also please try to set:
seriala FILE
serialb FILE
jit false
You can also experiment with the amount of memory for SheepShaver. 64 Mb should be the minimum.
ramsize 67108864
Best,
cat_7
You get a blinking question mark in the SheepShaver window when you have no disks set?
Also please try to set:
seriala FILE
serialb FILE
jit false
You can also experiment with the amount of memory for SheepShaver. 64 Mb should be the minimum.
ramsize 67108864
Best,
cat_7
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
Yes,without any Volumes Installed I'm getting a Blinking Question Mark with Floppy at center
Like this:
Like this:
Re: SheepShaver-Crashes at Start.
Yes, that means the rom file is found and working.
Best,
Cat_7
Best,
Cat_7
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
So it can be a Hard Disk Problem? I created now a disk in .hfv format,I put it into Volumes and still its not working.
Re: SheepShaver-Crashes at Start.
It can also be a memory problem.
It seems you downloaded the OS9.img from the redundant robot site. That image is known to work, but does not contain a complete Mac OS installation. So you can only use it for testing your setup.
Just creating a hard disk image file does not boot Mac OS in SheepShaver.
Normally you would boot from a real mac CD or CD image and then install Mac OS on a empty hard disk image file (like you made with .hfv extension). For SheepShaver it doesn't matter what extension the file has, only how it is formatted and which data are on it.
My final suggestion would be to try and restart your machine.
I do not know what might be wrong otherwise.
Best,
Cat_7
It seems you downloaded the OS9.img from the redundant robot site. That image is known to work, but does not contain a complete Mac OS installation. So you can only use it for testing your setup.
Just creating a hard disk image file does not boot Mac OS in SheepShaver.
Normally you would boot from a real mac CD or CD image and then install Mac OS on a empty hard disk image file (like you made with .hfv extension). For SheepShaver it doesn't matter what extension the file has, only how it is formatted and which data are on it.
My final suggestion would be to try and restart your machine.
I do not know what might be wrong otherwise.
Best,
Cat_7
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
I downloaded a ISO of Mac OS 9. I put .hfv disk and .iso file into volumes and still its crashing at start.
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
That's Weird.I installed Windows XP Professional SP2. On it, SheepShaver doesn't even start. When Im clicking it just shows clepsydra for one second and nothing.
- adespoton
- Forum All-Star
- Posts: 4227
- Joined: Fri Nov 27, 2009 5:11 am
- Location: Emaculation.com
- Contact:
Re: SheepShaver-Crashes at Start.
Try switching the order of your disks: iso file first, and hfv file second.OtonashiKun wrote:I downloaded a ISO of Mac OS 9. I put .hfv disk and .iso file into volumes and still its crashing at start.
Re: SheepShaver-Crashes at Start.
Could you try again with a folder called C⁄:SheepShaver?
Put all needed things, SS app, ROM, etc. and just one boot disk into that folder.
The OS9 image from Redundant is known to boot.
Delete the prefs file and create a new SS config.
Did you install the recommended GTK runtime? (just to be sure)
You may also try an upload of mine for evaluation.
If you use the directory C⁄:SheepShaver the paths would match and 7.5.3 should boot.
Note that the package is not signed of course, so some gatekeeper may complain.
https://mega.nz/#!J0dA3aaT!2PzzhrdFetFP ... DqjvLAn3rg
Put all needed things, SS app, ROM, etc. and just one boot disk into that folder.
The OS9 image from Redundant is known to boot.
Delete the prefs file and create a new SS config.
Did you install the recommended GTK runtime? (just to be sure)
You may also try an upload of mine for evaluation.
If you use the directory C⁄:SheepShaver the paths would match and 7.5.3 should boot.
Note that the package is not signed of course, so some gatekeeper may complain.
https://mega.nz/#!J0dA3aaT!2PzzhrdFetFP ... DqjvLAn3rg
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
OH MY GOD
MAN...it Works! Finally after 100 of f**** its finally working!!! I'll post a screenshot when its done
MAN...it Works! Finally after 100 of f**** its finally working!!! I'll post a screenshot when its done
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
As you can see it works finally, but there is only one little problem. Sound. Like it works on startup (Disk Aid when accidentally I turned off by ending process I hear this Uh Oh) But in system it doesn't see Output and Input.
- Ronald P. Regensburg
- Expert User
- Posts: 7821
- Joined: Thu Feb 09, 2006 10:24 pm
- Location: Amsterdam, Netherlands
Re: SheepShaver-Crashes at Start.
Did you look at the Sound control panel? There you should be able to select "Output" at the left and then select "built-in" at the right hand side.
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
Yep As you can see it doesn't detect anything. And in SS GUI Disable Sound Card Option is turned off.
Re: SheepShaver-Crashes at Start.
Your screenshot is from the OS9 image from Redundant?
Sound does not work with that IIRC.
Best install a OS of your choice from scratch on a new volume.
Many languages and versions are covered in the Mac OS Anthology.
If you want an installer from that collection, just let me know.
http://macintoshgarden.org/apps/mac-os-anthology-99
Sound does not work with that IIRC.
Best install a OS of your choice from scratch on a new volume.
Many languages and versions are covered in the Mac OS Anthology.
If you want an installer from that collection, just let me know.
http://macintoshgarden.org/apps/mac-os-anthology-99
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
No its,new Installed OS 9. From .iso File and new .hfs Hard Drive
Re: SheepShaver-Crashes at Start.
I see. I´ll have a look at my W10 notebook in the evening.
Could be the sound setting was done in 8.6. I´m usually using that because of nostalgia.
Off topic:
Don´t miss 7.6 with the OldWordROM, one of the best Apple OS IMHO.
Using the OldWordROM you may also reboot SS with another volume from ControlPanels/StartupVolume.
Could be the sound setting was done in 8.6. I´m usually using that because of nostalgia.
Off topic:
Don´t miss 7.6 with the OldWordROM, one of the best Apple OS IMHO.
Using the OldWordROM you may also reboot SS with another volume from ControlPanels/StartupVolume.
-
- Student Driver
- Posts: 15
- Joined: Tue Feb 14, 2017 12:53 pm
- Location: Wroclaw,Poland
Re: SheepShaver-Crashes at Start.
I tired another ROM (New World) sound still not working. I really wonder why. I tried run sound on my Friend's computer and it works just fine.
Re: SheepShaver-Crashes at Start.
Can´t tell what went wrong on your side either.
I tried with one of my W10 boxes, with no SS installed.
Downloaded Cat_7´s experimental build and the "always start with.."
Replaced the SS.exe from the SS folder with the experimental one.
Downloaded a 10GB image from here: http://macintoshgarden.org/apps/disk-images-emulators
Booted SS from a 8.5 CD of mine, formatted the 10GB thing as MacOS Standard.
Installed 8.5 with all extra boxes checked and sound was there without any setting needed.
I´m using the OldWordROM for several reasons but don´t think the ROM is an issue here.
Maybe try another MacOS than 9, once your emulated Mac has sound enabled via built in output, sound will work for any SS compatible OS.
I tried with one of my W10 boxes, with no SS installed.
Downloaded Cat_7´s experimental build and the "always start with.."
Replaced the SS.exe from the SS folder with the experimental one.
Downloaded a 10GB image from here: http://macintoshgarden.org/apps/disk-images-emulators
Booted SS from a 8.5 CD of mine, formatted the 10GB thing as MacOS Standard.
Installed 8.5 with all extra boxes checked and sound was there without any setting needed.
I´m using the OldWordROM for several reasons but don´t think the ROM is an issue here.
Maybe try another MacOS than 9, once your emulated Mac has sound enabled via built in output, sound will work for any SS compatible OS.