Emaculation.com
 

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ppc-osx-on-qemu-for-osx [2018/08/11 12:36]
cat_7 [Qemu installation]
ppc-osx-on-qemu-for-osx [2018/09/11 02:18] (current)
cat_7 [Experimental builds]
Line 101: Line 101:
 However, you can also use the realtek 8139 device. This requires installation of the appropriate drivers. You can download them from the [[http://​www.realtek.com.tw/​Downloads/​downloadsView.aspx?​Langid=1&​PNid=14&​PFid=6&​Level=5&​Conn=4&​DownTypeID=3&​GetDown=false|Realtek site]], or all drivers in one iso from [[http://​www.open.ou.nl/​hsp/​downloads3/​MacOSRealtekDrivers.zip |here]] \\ However, you can also use the realtek 8139 device. This requires installation of the appropriate drivers. You can download them from the [[http://​www.realtek.com.tw/​Downloads/​downloadsView.aspx?​Langid=1&​PNid=14&​PFid=6&​Level=5&​Conn=4&​DownTypeID=3&​GetDown=false|Realtek site]], or all drivers in one iso from [[http://​www.open.ou.nl/​hsp/​downloads3/​MacOSRealtekDrivers.zip |here]] \\
    
-There are two ways to get networking going in OSX: through slirp or tap networking+There are two ways to get networking going in OSX: through slirp or tap networking:
  
 === Slirp-based networking === === Slirp-based networking ===
Line 132: Line 132:
  
  
-=== Running two qemu instances with networking===+=== Running two qemu instances with networking ===
  
 If you want to run two installations of Mac OS/OSX, Qemu needs to be able to tell the network devices apart. You can add a mac address to the networking device: If you want to run two installations of Mac OS/OSX, Qemu needs to be able to tell the network devices apart. You can add a mac address to the networking device:
Line 140: Line 140:
   * -netdev user,​id=network01 -device sungem,​netdev=network01,​mac=52:​54:​00:​12:​34:​66   * -netdev user,​id=network01 -device sungem,​netdev=network01,​mac=52:​54:​00:​12:​34:​66
 Please note that adding a mac address other than the default to the network device leads to the discovery of a new network card in OSX. You need to configure that card through the network preferences. Please note that adding a mac address other than the default to the network device leads to the discovery of a new network card in OSX. You need to configure that card through the network preferences.
 +
 +=== Getting files in and out of your emulated Mac through a network connection ===
 +
 +OSX 10.3/10.4 guests: Make sure you have file sharing enabled on your host and that you share some folder. Find the current IP address of your host: open the system report and click Networking. The IP address should show behind the active network connection. \\
 +Start Qemu, click Go/Connect to server. Enter 
 +  afp://​ip-address-of-your-host. ​
 +At Connect as select Registered user and enter your user name and password for your host. Then select a shared folder from the list and click OK. You can now read and write files to the shared folder that appeared on your desktop.\\
  
 ==== Booting from a real CD ==== ==== Booting from a real CD ====
  
-To boot from a real, you need to insert the CD and unmount it using e.g., Diskutility. \\+To boot from a real CD, you first need to insert the CD and unmount it using e.g., Diskutility. \\
 Next, run Qemu as root. So add sudo in front of ./​qemu-system-ppc and set -cdrom /dev/cdrom in your command file.\\ Next, run Qemu as root. So add sudo in front of ./​qemu-system-ppc and set -cdrom /dev/cdrom in your command file.\\
 Example command line:\\ Example command line:\\
Line 152: Line 159:
  
  
-If the CD is not unmounted correctly, Qemu will tell you the commands you need to enter (in e.g., another terminal window) to unmount the CD. For example:\\+If the CD was not unmounted correctly, Qemu tells you the commands you need to enter (in e.g., another terminal window) to unmount the CD. For example:\\
  
   qemu-system-ppc:​ -cdrom /dev/cdrom: If device /dev/disk5 is mounted on the desktop, unmount it first before using it in QEMU   qemu-system-ppc:​ -cdrom /dev/cdrom: If device /dev/disk5 is mounted on the desktop, unmount it first before using it in QEMU
Line 191: Line 198:
 ==== Mounting a real cd ==== ==== Mounting a real cd ====
  
-NOTE: you cannot mount Mac formatted CD's, but other formats work \\ 
 NOTE: you need to unmount the real cd from the desktop (using e.g., disk utility) before using it in Qemu. \\ NOTE: you need to unmount the real cd from the desktop (using e.g., disk utility) before using it in Qemu. \\
  
Line 208: Line 214:
  
 -Sound support\\ -Sound support\\
--Support for a PMU (power management unit)\\ 
  
 You can download some of these experimental builds from our forum: http://​www.emaculation.com/​forum/​viewtopic.php?​f=34&​t=8848&​p=52102#​p52102 You can download some of these experimental builds from our forum: http://​www.emaculation.com/​forum/​viewtopic.php?​f=34&​t=8848&​p=52102#​p52102
ppc-osx-on-qemu-for-osx.1534016160.txt.gz ยท Last modified: 2018/08/11 12:36 by cat_7
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki