is that the highest?

Ive got a mac os 9.0.4 running and i want to update it t newer versions. what is the highest version of mac os 9 can i update it to?

Hi, Then just replace the numbers you had from the video. As I said earlier, I don't know too much anymore about networking pearpc, and I don't want to get you into trouble on that front ;-) Best, Cat_7 I got it to work. All I had to do was update to 10.4.11 and change 192.168.5.1 and 192.168.5.2 t...

Hi, This is how this should work: You connect the tap device through your normal network device by sharing the connection. You should do that by performing the sharing setup on the normal network device. You choose the tap device as network device you want to allow to share the connection. Upon act...

Hi, What have you got running on the host for PearPC to connect through? Did you see the tap device getting activated? Is it's connection shared with your normal network? Where did you get the numbers from you entered in the ethernet settings? Best, cat_7 I have the newest openvpn (2.1.1). The tap ...

I started over with a fresh install of tiger and followed this guide: http://www.youtube.com/watch?v=4EPbmioD5C8 Here are screenshots of what is going on: http://img685.imageshack.us/img685/723/newbitmapimageuk.png http://img69.imageshack.us/img69/8965/newbitmapimage2lc.png Also, in the drop down me...

Hi, Yes, I know that sound-enabled build. It produces something audible after several seconds, but nothing intelligable. So, I place that build under "not working". It also requires adjustments to the config file to run. It was based on a version 0.2 of PearPC and so it has no knowledge o...

There are two main approaches to networking PearPC, the first two require the VPN tap driver installed: With Internet Connection Sharing: http://wiki.pearpc.net/index.php?title=ICS_Networking_for_XP/Vista With VPN: Check out the networking guides: http://wiki.pearpc.net/index.php?title=Networking W...

Hi, Are you running full screen? What screen setting is used in the prefs file? is it the same as in Pearpc's OSX? When PearPC runs in a window, the window will be bigger then the OS it's running. The laggyness is something that will only be solved by a faster computer, and preferably some serious ...

I got it working, but I have a 64-bit laptop where the resolution is 1366x and 768y. This option is available in the display settings. Once I set it, the screen gets cut off. (Normally, the screen would be centered at 1024x, 768y, and It stays in that center when I change the resolution.) How do I f...

In your first post you said you were following the guide on this site. Which is not quite the same thing as using the pearpc.net package. None of us really know anything about that package. Maybe the pearpc.net forum might be able to help you better, if you can find someone active over there... Alr...

tgp1994 wrote:Ya, windows can be silly sometimes That's gone to the top of my list for things-to-do-when-something-doesn't-work-on-windows.

same here.

ClockWise wrote:mixmaster,

Are you using the old PearPC.net package? If so, you could try again using the setup guide on this site...

The newest one.

tgp1994 wrote:Try running it in 32 bit mode, along with making sure you run it as an administrator.

it needs administrative rights? Won't it say "This program wants to make changes to this computer"? I will try.
EDIT:Wow, it worked.

Cat_7 wrote:Hi,

How do you start PearPC?
You should navigate to the pearpc folder and then issue something like:
ppc.exe ppccfg.txt (where ppccfg.txt is the name of your config file)

Best,
Cat_7

To start it I go to the APE.jar, press load config, and save and start.

Does this work with 64-bit windows 7? It won't run on my acer aspire 5532.

Hi, Normally these errors occur when a path to some file is not set correctly. Please double check to see if all paths and file names are correct. For clarity of setup, I suggest you move all files into one folder, e.g. your e:\pearpc folder. I would like to suggest you use the config file below. I...

#ape_executable = "E:\pearpc\ppc.exe" ppc_start_resolution = "1024x768x32" ppc_start_full_screen = 0 redraw_interval_msec = 10 pci_ide0_master_installed = 1 pci_ide0_slave_installed = 1 pci_ide0_master_image = "E:\pearpc\PearPC.net package\Master HD.img" pci_ide0_slave_...

I followed this: http://www.emaculation.com/doku.php/pearpc_setup
When I press the green arrow a black window pops up and I can type in Green. Nothing happens after that.

Thank you cat_7. I kept rebooting over and over and eventually it worked.
P.S. iCab is REALLY slow loading pictures. Mabye I should get a different browser...

Yes, Best to start all over again with a clean 7.5.3 install. Use the steps I described above. And forget about your Windows networking/WEP key. If it works, leave it alone. You emulated mac will just use the connection. Best, Cat_7 I tried it and it freezes basilisk ii and i have to end it in task...

I don't have network selector in my OS 7.5.5. Also, when I upgraded I lost tcp/ip control panel. Did you have the TCP/IP control panel in 7.5.3? With a default installation, you will usually have in 7.5.3 The "Network" control panel and the "MacTCP" control panel. When the Netwo...

Hi, Basilisk network piggybacks on your windows network, so if networking works in windows, you should be able to get it running in Basilisk Lets run through your settings: -You have selected "slirp" as network protocol in the GUI. -You have used the Network selector in OS 7.5 to select O...

Thanks Clockwise, but still no good. Same error. updated to 7.5.5 still no luck

I just finished Getting system 7.5.3 on basilisk ii, and I installed a web browser.
I have followed the instructions here but I still can't connect. I get an error message.(Network error #-23045) I have a wireless connection with a password. How would I connect?