Search found 4812 matches

by Cat_7
Sat Jul 24, 2021 6:49 pm
Forum: QEMU
Topic: Sharing files between Big Sur host and 10.4
Replies: 11
Views: 82

Re: Sharing files between Big Sur host and 10.4

Assuming you use the command line setting you posted above: -device sungem,netdev=network01 \ -netdev user,id=network01,hostfwd=tcp::2121-:21 \ First set Filezilla to use Active mode, so at the Connection/FTP setting select Active. You should enter the IP address of your host, the username and passw...
by Cat_7
Sat Jul 24, 2021 5:27 am
Forum: QEMU
Topic: Sharing files between Big Sur host and 10.4
Replies: 11
Views: 82

Re: Sharing files between Big Sur host and 10.4

Hi, I looked into some documentation, and it appears support for the afp protocol was removed from Big Sur, so the solution you used will not work anymore. Support for afp was also removed from Catalina host when the shared folder was not on a HFS+ formatted volume. For now it seems the only solutio...
by Cat_7
Fri Jul 23, 2021 1:40 pm
Forum: QEMU
Topic: OSX 10.4 System Update
Replies: 4
Views: 36

Re: OSX 10.4 System Update

Hi,

No, not hours. Perhaps an hour, and then restart again.

Best,
Cat_7
by Cat_7
Fri Jul 23, 2021 4:29 am
Forum: QEMU
Topic: Sharing files between Big Sur host and 10.4
Replies: 11
Views: 82

Re: Sharing files between Big Sur host and 10.4

Hi, Can you show us your command line to see how you set up the network connection? Mail will indeed not work with the old Safari browser. You might have more luck with: https://www.floodgap.com/software/tenfourfox/ Perhaps a solution can be found by running the ftp server on your 10.4 guest and to ...
by Cat_7
Fri Jul 23, 2021 4:19 am
Forum: QEMU
Topic: OSX 10.4 System Update
Replies: 4
Views: 36

Re: OSX 10.4 System Update

Hi,

That update takes a long time after you restart your "Mac". Did you give it enough time?

Best,
Cat_7
by Cat_7
Wed Jul 21, 2021 4:20 am
Forum: QEMU
Topic: CD
Replies: 1
Views: 52

Re: CD

Hi,

Changing the mounted CD image is described in our setup manual:
https://www.emaculation.com/doku.php/pp ... drom_image

Best,
Cat_7
by Cat_7
Wed Jul 21, 2021 4:17 am
Forum: QEMU
Topic: QEMU not running - no valid state has been set
Replies: 27
Views: 996

Re: QEMU not running - no valid state has been set

Hi,

You don't burn the image to a DVD, you just use the image file to boot Qemu.

Best,
Cat_7
by Cat_7
Tue Jul 20, 2021 11:04 am
Forum: QEMU
Topic: Two tips for installing Mac OS X 10.5 Leopard in QEMU
Replies: 12
Views: 3504

Re: Two tips for installing Mac OS X 10.5 Leopard in QEMU

Hi,

I believe the maximum amount of ram you can assign to Qemu running OSX is 2.0 Gb, so
-m 2048

Best,
Cat_7
by Cat_7
Mon Jul 19, 2021 6:56 pm
Forum: QEMU
Topic: Looking to attempt GPU passthrough - Which card to get?
Replies: 16
Views: 241

Re: Looking to attempt GPU passthrough - Which card to get?

I case you cannot create your own openbios, a more or less suitable openbios containing some patches to allow loading/executing a rom file is in the download here: https://surfdrive.surf.nl/files/index.php/s/pG3dNzNTyifTxIz/download It also contains a readme on how to get things going with Mac OS 9....
by Cat_7
Sun Jul 18, 2021 9:04 pm
Forum: QEMU
Topic: Looking to attempt GPU passthrough - Which card to get?
Replies: 16
Views: 241

Re: Looking to attempt GPU passthrough - Which card to get?

Hi, Here are some pointers and a good explanation of the issue to be addressed by one of the programmers that put considerate effort into getting a card to work: Zoltan says: "One important point that was not mentioned that it will never work with the OpenBIOS that comes with QEMU because that ...
by Cat_7
Sat Jul 17, 2021 4:07 pm
Forum: QEMU
Topic: Looking to attempt GPU passthrough - Which card to get?
Replies: 16
Views: 241

Re: Looking to attempt GPU passthrough - Which card to get?

That is the address where the rom file will be loaded.
You'd have to find out where yours should go.

For initial boot you do not need to install the card drivers in Mac OS. The fcode on the card will contain a basic driver.

Best,
Cat_7
by Cat_7
Sat Jul 17, 2021 5:46 am
Forum: QEMU
Topic: Looking to attempt GPU passthrough - Which card to get?
Replies: 16
Views: 241

Re: Looking to attempt GPU passthrough - Which card to get?

Hi, On a real mac you could type "boot" and openbios would then execute the boot sequence up to the point where it hands over control to the Mac OS. Part of that execution is the load the rom file (written in fcode) contained on the Apple graphics card and to populate the device tree and l...
by Cat_7
Wed Jul 14, 2021 4:53 pm
Forum: QEMU
Topic: Looking to attempt GPU passthrough - Which card to get?
Replies: 16
Views: 241

Re: Looking to attempt GPU passthrough - Which card to get?

Hi,

Audio support is only available when you build your own Qemu from this repository (and use the included openbios-ppc):
https://github.com/mcayland/qemu/tree/screamer

Best,
Cat_7
by Cat_7
Wed Jul 14, 2021 11:26 am
Forum: Basilisk II
Topic: Boot failure after crash
Replies: 3
Views: 42

Re: Boot failure after crash

Hi,

It seems strata studio 1.x? requires fpu emulation to function on an m68k machine.
What settings do you use for the JIT compiler and ignore illegal memory access etc?

Have you tried newer versions with SheepShaver?

Best,
Cat_7
by Cat_7
Sun Jul 11, 2021 7:30 am
Forum: QEMU
Topic: 2 drives issue
Replies: 4
Views: 89

Re: 2 drives issue

Hi, The last line in your command line should never end with a ^, as the command processor will try to read a next line which isn't there and will wait for it. So remove the last ^ and you should be good to go. Also take care to never have a space behind the ^ ending any but the last line. Best, Cat_7
by Cat_7
Sat Jul 10, 2021 1:36 pm
Forum: QEMU
Topic: 2 drives issue
Replies: 4
Views: 89

Re: 2 drives issue

Hi,

I guess there can be two issues:
1. Your command line is not yet correct.
2. You did not yet initialise the disk with drive setup.

Best,
Cat_7
by Cat_7
Sat Jul 03, 2021 4:51 am
Forum: QEMU
Topic: How to install Tiger on QEMU?
Replies: 18
Views: 265

Re: How to install Tiger on QEMU?

Hi, Yes, Qemu can access disks and cdrom drives. Insert the CD, wait for it to show up on the desktop, go to disk utlity and unmount the CD. Edit your qemu.command to run Qemu as root: sudo ./qemu-system-ppc \ and replace the current -drive line that points to your dvd installation image (if still t...
by Cat_7
Thu Jul 01, 2021 12:30 pm
Forum: QEMU
Topic: How to install Tiger on QEMU?
Replies: 18
Views: 265

Re: How to install Tiger on QEMU?

Hi,

There are various ways to get files into Tiger, see our guide here:
https://www.emaculation.com/doku.php/pp ... mu-for-osx

Best,
Cat_7
by Cat_7
Thu Jul 01, 2021 4:38 am
Forum: QEMU
Topic: How to install Tiger on QEMU?
Replies: 18
Views: 265

Re: How to install Tiger on QEMU?

Ah, great. .cdr or .iso only gives an indication of what the actual content of a file might be. In this case they are the same. After the installation you have to edit the qemu.command file to tell Qemu to boot from the hard disk image: change: -boot d \ to -boot c \ and start Qemu. It will not be f...
by Cat_7
Wed Jun 30, 2021 8:46 pm
Forum: QEMU
Topic: How to install Tiger on QEMU?
Replies: 18
Views: 265

Re: How to install Tiger on QEMU?

If everything would be fine, you would see a yellow-ish screen that is after a few seconds replace by the image of Tiger booting from the CD image. From that point onward you should arrive at the installer which works exactly the same as on a real machine. Did you run the "allow_qemu_to_run&quo...
by Cat_7
Wed Jun 30, 2021 5:37 pm
Forum: QEMU
Topic: How to install Tiger on QEMU?
Replies: 18
Views: 265

Re: How to install Tiger on QEMU?

Yes it is a terminal command. Is the qemu-img program not part of your download? If so, cd to the folder in which you downloaded qemu and try again. Or use the "new terminal here" (don't know its exact name) option in the finder to go there directly. I've never tried creating a disk image ...
by Cat_7
Wed Jun 30, 2021 3:51 pm
Forum: QEMU
Topic: How to install Tiger on QEMU?
Replies: 18
Views: 265

Re: How to install Tiger on QEMU?

Hi, There are indeed some changes needed to the commands in the guide: 1. You need to make a bigger file to be used as hard disk. Let's say 10Gb: ./qemu-img create -f raw -o size=10G Tiger.img 2. You need to have a disk image of the Tiger installation DVD. Below that image file is called Tiger.iso. ...
by Cat_7
Thu Jun 24, 2021 9:52 pm
Forum: SheepShaver
Topic: SheepShaver for Windows
Replies: 311
Views: 884755

Re: SheepShaver for Windows

If you would, by all means.

Best,
Cat_7
by Cat_7
Thu Jun 24, 2021 6:24 pm
Forum: SheepShaver
Topic: SheepShaver for Windows
Replies: 311
Views: 884755

Re: SheepShaver for Windows

Well, it is obviously a "enhanced" download of a build I created for our forum. And a bad one at that, as it contains the preferences from the uploader's running system and a now obsolete gtk development package that was once needed to run the GUI ;-) 6Gb for a lot of Apple commercials and...
by Cat_7
Thu Jun 24, 2021 2:39 pm
Forum: SheepShaver
Topic: SheepShaver for Windows
Replies: 311
Views: 884755

Re: SheepShaver for Windows

You'd need to upload your screen shot to some image/file sharing site and then link to it to have it show up here.