My question is, how do I mount a SCSI2SD volume so I can write to it using OSXFUSE? I swear I did this in the past, but I cannot figure out how to do it now.
I have a 8GB MicroSD that was set up with SCSI2SD-util, and has been used as four separate 2GB volumes with a Mac SE (via DB25 SCSI)
I have installed OSXFUSE 3.8.2 (on macOS High Sierra 10.13.6) and can easily mount the first volume (as expected), but my issue is that I used to be able to mount the volume and transfer software to the SD card. Presently, I cannot mount the drive as writeable.
Here's what I see in terminal:
Code: Select all
$ diskutil list /dev/disk2 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: Apple_partition_scheme *8.0 GB disk2 1: Apple_HFS Templates-SCSI1 2.1 GB disk2s1 2: Apple_partition_map 32.3 KB disk2s2 3: Apple_Driver43 16.4 KB disk2s3 $ df -h Filesystem Size Used Avail Capacity iused ifree %iused Mounted on /dev/disk2s1 2.0Gi 531Mi 1.5Gi 26% 1858 4294965421 0% /Volumes/Templates-SCSI1 $ mount /dev/disk2s1 on /Volumes/Templates-SCSI1 (hfs, local, nodev, nosuid, read-only, noowners) $ mount -u -w "/Volumes/Templates-SCSI1/" mount: unknown special file or file system /Volumes/Templates-SCSI1/.