Hello all.
I have burned a 8.5 image into a CD-RW. On Gentoo 2004.0 sheepshaver is compiled perfectly, Im using 800x600 window mode CD is recognized, It seems to boot perfectly (Mac OS loading) but the progress bar freezes in the very begining.
1) I have tried to hold shift and disable extensions. Freezes to, a little bit later.
2) I have disabled JIT. Sheepshaver does not freeze, it ends with the following message:
Illegal instruction at 40810000, opcode = 4cdf1808
3) I have tried to use /mnt/cdrom as a volume. Did not recognized anything. Question mark blinking on my face.
Any1 has a clue about what's happening ?
--------------------sig---------------------------------------
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
SheepShaver freezes while starting 8.5
Moderators: Cat_7, Ronald P. Regensburg, ClockWise
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
-
- Expert User
- Posts: 868
- Joined: Sat Aug 30, 2003 4:15 pm
- Location: UK
- Contact:
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
Hi Stephen, I'm a big Amiga fan too. I still have my A1200. Nice web site you got.
I forgot to mention about the mount. I have assured that /mnt/cdrom wasn't mounted. By the way, my Gentoo can't even mount the cd, returning an Error saying that it cant recognize the FS.
I'll try to burn the image on a CD-R tonight.
Do you know if there's a way to see some debug messages from SheepShaver ? Something like ./Sheepshaver --debug on
Regards,
Heitor Barcellos.
I forgot to mention about the mount. I have assured that /mnt/cdrom wasn't mounted. By the way, my Gentoo can't even mount the cd, returning an Error saying that it cant recognize the FS.
I'll try to burn the image on a CD-R tonight.
Do you know if there's a way to see some debug messages from SheepShaver ? Something like ./Sheepshaver --debug on
Regards,
Heitor Barcellos.
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
-
- Expert User
- Posts: 868
- Joined: Sat Aug 30, 2003 4:15 pm
- Location: UK
- Contact:
I hardly know anything about linux, i have only just installed it on my system.
I also don't know much about shhepshaver, as i can't even get it to load ot compile.
So i'm not sure what your problem is.
I also don't know much about shhepshaver, as i can't even get it to load ot compile.
So i'm not sure what your problem is.
Is that the website in my signature that you are on about?Hi Stephen, I'm a big Amiga fan too. I still have my A1200. Nice web site you got.
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
Damn. Freezed again. Even with a CD-R.
I'm gonna test the CD with my iMac to see if it's ok.
About debug messages ? Someone knows if and how i can do it ?
regards,
Heitor Barcellos.
I'm gonna test the CD with my iMac to see if it's ok.
About debug messages ? Someone knows if and how i can do it ?
regards,
Heitor Barcellos.
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
This is the message that appears when JIT is off:
heitor Unix # ./SheepShaver
SheepShaver V2.2 by Christian Bauer and Mar"c" Hellwig
Reading ROM file...
PowerPC CPU emulator by Gwenole Beauchesne
Illegal instruction at 40810000, opcode = 4cdf1808
Im running out of ideas!
heitor Unix # ./SheepShaver
SheepShaver V2.2 by Christian Bauer and Mar"c" Hellwig
Reading ROM file...
PowerPC CPU emulator by Gwenole Beauchesne
Illegal instruction at 40810000, opcode = 4cdf1808
Im running out of ideas!
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
I'm using the one from MAC OS 8.6 Cd, taked from MOL webpage.
My 8.5 image is one from aMule called Mac Os 8.5 Optimus.ISO. I have downloaded that but im not a pirate because I have a legal copy of Mac OS 9 from my iMac Graphite SE. I don't know with Apple let me downgrade my license, but anyway i fell myself a little better with that. I'm just testing SheepShaver anyway!
well.... I have tried with both Enabled and Disabled ignore illegal memory access. Same behaviour.
When i set JIT it only hangs, does not abort.
regards.
My 8.5 image is one from aMule called Mac Os 8.5 Optimus.ISO. I have downloaded that but im not a pirate because I have a legal copy of Mac OS 9 from my iMac Graphite SE. I don't know with Apple let me downgrade my license, but anyway i fell myself a little better with that. I'm just testing SheepShaver anyway!
well.... I have tried with both Enabled and Disabled ignore illegal memory access. Same behaviour.
When i set JIT it only hangs, does not abort.
regards.
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22