Fullscreen Mod
Moderators: Cat_7, Ronald P. Regensburg
-
- Forum All-Star
- Posts: 587
- Joined: Mon May 17, 2004 11:57 pm
I have no idea what could be causing this. My code shouldn't affect the emulation side of PearPC at all..No it did not, just the grey screen with the apple it stayed like that for about ten min before i shut it down in 16bit it takes a bit more time then in 1024x768 32bit but the swirly thing appears after 15 sec
This is strange. 1280x960 works great for me. Does OS X's display properties report 1280x960 or 1280x1024.Has anyone had any success booting the widescreen (1280x960) resolution? When I try it it just comes out at 1280x1024.
Also please remember that 1280x960 is not a widescreen resolution, its normal 4:3 ratio like 1024x768. It won't look like widescreen. (not sure if this is causing confusion or not, but I figured the explanation couldn't hurt)
Dalamax[/quote]
-
- Forum All-Star
- Posts: 587
- Joined: Mon May 17, 2004 11:57 pm
linux
hello,
where can i get this patch for linux ?
Oliver
where can i get this patch for linux ?
Oliver
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
You can grab it from the nightly builds page...that has the Network AND the full screen patch and that is hereChr1z wrote:
hi ! for some reason my "IPv6 Address" its not showing in the Network panel on OSX 10.3, it could be a problem ? thanks in advance..
no the thing you have to set is not the IPv6 but IP4 wich is on the same window but on top
http://richardgoodwin.com/pearpc/downlo ... screen.zip
The patch is in the Patches section of the PearPC project at sourceforge.net.Exactly where at?
http://sourceforge.net/tracker/?group_i ... tid=651197
Dalamax
i am sorry to say but i get an error about my networking card when i try to boot with the exe @ richardgoodwin.comCybermagellan wrote:You can grab it from the nightly builds page...that has the Network AND the full screen patch and that is hereChr1z wrote:
hi ! for some reason my "IPv6 Address" its not showing in the Network panel on OSX 10.3, it could be a problem ? thanks in advance..
no the thing you have to set is not the IPv6 but IP4 wich is on the same window but on top
http://richardgoodwin.com/pearpc/downlo ... screen.zip
ataxy: use the non-archived jit binary here: http://www.kelley.ca/pearpc/
hopefully they will optomize it for pentium4 soon...looking forward to that
hopefully they will optomize it for pentium4 soon...looking forward to that
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
-
- Student Driver
- Posts: 18
- Joined: Mon May 31, 2004 8:12 am
- Contact:
can this patch be run on Gentoo?
I have got a problem now.
When I ran with the Linux CVS which optimized for P4, download from Nightly Build, this error came out..
main() caught exception: Failed to open /dev/net/tun
What does it mean? and how can I solve it?
and also, I am using a Realtek 8139 NIC, so, how can i get it works?
Thanks in advance.
I have got a problem now.
When I ran with the Linux CVS which optimized for P4, download from Nightly Build, this error came out..
main() caught exception: Failed to open /dev/net/tun
What does it mean? and how can I solve it?
and also, I am using a Realtek 8139 NIC, so, how can i get it works?
Thanks in advance.