Windows Networking, It's finally here!
Moderators: Cat_7, Ronald P. Regensburg
-
- Forum All-Star
- Posts: 587
- Joined: Mon May 17, 2004 11:57 pm
Startup Problems.
my ppc.cfg states:
pci_rtl8139_installed = 1
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
2.0 TAP driver is installed on w2k, latest service pack
but then:
[TAP-WIN32]: Enumerating TAP devices...
[TAP-WIN32]: Could not locate any installed TAP-WIN32 devices.
[IO/rtl8139] <Error> Open enetif failed: Operation not permitted
any ideas? thx!
pci_rtl8139_installed = 1
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
2.0 TAP driver is installed on w2k, latest service pack
but then:
[TAP-WIN32]: Enumerating TAP devices...
[TAP-WIN32]: Could not locate any installed TAP-WIN32 devices.
[IO/rtl8139] <Error> Open enetif failed: Operation not permitted
any ideas? thx!
ok.
ok, sorry. was being hasty. obviously the current download on the other site fixes the trouble (wasn't working a few minuten ago):
http://www.kelley.ca/pearpc/pearpc_noar ... net-R2.rar
Somebuddy
http://www.kelley.ca/pearpc/pearpc_noar ... net-R2.rar
Somebuddy
captain, does the mac address in your config end with 34 or 35?
Last edited by MDZ61384 on Wed May 26, 2004 11:53 pm, edited 2 times in total.
The problem were solved by:Got OS X 10.3 working but I can't seem to get the TAP32-WIN-adapter to work. I't seems as if there is a Windows problem, here's what happens:
1. I install the 2.0 version of the driver (and only the driver, nothing else).
2. I go to network settings to enable the Internet Connection Sharing on my regular NIC but then i get this message:
Are you sure you want to enable Internet Connection-sharing?
- i click yes
Then this message pops up:
"An error occured while Internet Connection Sharing was being enabled
Internet connection sharing cannot be enabled. The LAN connection
selected as the private network is either not present, or is
disconnected from the network. Please ensure that the LAN
adapter is connected before enabling Internet COnnection Sharing."
I can see the adapter and it says "Network cable unplugged"
but this should not make a difference, or does it?
I have tried enabling Internet Connection Sharing for my other
NIC and then it worked, but not for the TAP-32 driver.
What could be wrong? All help is welcome!
Downloading and installing the latest build from:
http://www.kelley.ca/pearpc/pearpc_noar ... net-R2.rar
Then I solved the problem by 1st booting the Mac OS X and letting it find the TAP-NIC, afterwards (while Mac OS X still running) I enabled the Internet Connection Sharing and then return back to Mac OS X and setting everything manually (as on the webpage)!
Just in case anyone would get in the same situation as me!
Btw, did you know that this software kicks ass!?
Congrats to the authors of it
Re: Startup Problems.
I get the exactsame problemSomebuddy wrote:my ppc.cfg states:
pci_rtl8139_installed = 1
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
2.0 TAP driver is installed on w2k, latest service pack
but then:
[TAP-WIN32]: Enumerating TAP devices...
[TAP-WIN32]: Could not locate any installed TAP-WIN32 devices.
[IO/rtl8139] <Error> Open enetif failed: Operation not permitted
any ideas? thx!
anyone have any ideas?
@bolero - read my previous post on page 3
or simply install
http://www.kelley.ca/pearpc/pearpc_noar ... net-R2.rar
was fixed in the R2 archive.
Somebuddy
or simply install
http://www.kelley.ca/pearpc/pearpc_noar ... net-R2.rar
was fixed in the R2 archive.
Somebuddy
EDIT: Fixed my problems. If you are on a wireless connection, you have to enable ICS from your wireless connection TO your openvpn connection. I am currently in the process of configuring ip's so I"ll keep you guys in tune.
If you are on wireless, do NOT go from your normal wired lan connection and share your wireless connection...doesn't work that way! (as I stupidly found out)
If you are on wireless, do NOT go from your normal wired lan connection and share your wireless connection...doesn't work that way! (as I stupidly found out)
Last edited by MDZ61384 on Wed May 26, 2004 11:26 pm, edited 1 time in total.
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
Could be...
It "could" be I don't forsee it though....are you able to use TCP based programs? If so I don't know where the issue would be
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
Cool
I'm not sure why that is working it should work the directed way....however good info to have...the more work arounds we have the better the documentation for the software we can gather and create. As far as that goes I recommend that if you have a work around that you list it in the appropriate thread. I will try to get approval for a documentation site for that....
thanks got it fixed, got os x to seet he network card, only thing is i cant get the net to work, cant figure out a right combination of ip's that will workSomebuddy wrote:@bolero - read my previous post on page 3
or simply install
http://www.kelley.ca/pearpc/pearpc_noar ... net-R2.rar
was fixed in the R2 archive.
Somebuddy
-bolero
this is so frustrating...it says I have an IP and yet it won't work...that way or manually configuring
my wireless router ip: 192.168.1.1
my computer ip: 192.168.1.2
dns: same as my wireless router ip
what the heck am I doing wrong? I put 192.168.1.1 for dns and 192.168.0.200 for the ip...192.168.0.1 for "router" in pearpc and it still doesn't work. can't figure out the dumb ip's...
my wireless router ip: 192.168.1.1
my computer ip: 192.168.1.2
dns: same as my wireless router ip
what the heck am I doing wrong? I put 192.168.1.1 for dns and 192.168.0.200 for the ip...192.168.0.1 for "router" in pearpc and it still doesn't work. can't figure out the dumb ip's...
Can't find TAP-WIN32
Hi I download OpenVNC 2.0 and install it on windows xp and when I run the emulator it come up with:
[TAP-WIN32]: Enumerating TAP devices...
[TAP-WIN32]: Could not locate any installed TAP-WIN32 devices.
[IO/rtl8139] <Error> Open enetif failed: Operation not permitted
Does any one know why it does not find it? it install as new network card but program can't find it.
[TAP-WIN32]: Enumerating TAP devices...
[TAP-WIN32]: Could not locate any installed TAP-WIN32 devices.
[IO/rtl8139] <Error> Open enetif failed: Operation not permitted
Does any one know why it does not find it? it install as new network card but program can't find it.
-
- Forum All-Star
- Posts: 587
- Joined: Mon May 17, 2004 11:57 pm
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
DNS?
I've noticed alot of members that are having an issue with Wireless connections.....and are you configuring manually I don't remmeber entering a DNS however that was last night....I know the new update of 10.3.2 has updated wireless support so you might wanna try to download and install that......(even though this is VPN, it's just a recommendation) um, as far as that goes remove the DNS part....I've heared that as well that the DNS resolution isn't handled by PearPC better leave it to windows....as long as you have the connection to the Windows enviroment everything should be fine
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
RC2
iceboi....are you using WinXP SP2? there is a new binary for that if so try that.
cybermagellan, I will try not entering a dns and see what happens.
it told me last time that I was connected and had an ip...but I still couldn't connect. I guesss I"m just frustrated. I have a wireless connection...netgear 54g...their addresses are above. is our IP 192.168.0.200 no matter what the IP of our router is?
thanks captainvalor for that
Same error: could not open the page http://livepage.apple.com because the server livepage.apple.com could not be found
bah
it told me last time that I was connected and had an ip...but I still couldn't connect. I guesss I"m just frustrated. I have a wireless connection...netgear 54g...their addresses are above. is our IP 192.168.0.200 no matter what the IP of our router is?
thanks captainvalor for that
Same error: could not open the page http://livepage.apple.com because the server livepage.apple.com could not be found
bah
Last edited by MDZ61384 on Thu May 27, 2004 12:05 am, edited 1 time in total.
no i have the same thing when i do winver and i have no problem connecting ppc to the webAncient Imhotep wrote:I have just spotted this on the authors website: -
This does not currently work with WinXP SP2 or the OpenVPN v2.0 listed below. I am working on a new patch.
Even though SP2 is not available yet, I thought that I would check my Windows XP version using the winver command from the command prompt and I got this: -
Version 5.1 (Build 2600.xpsp2.030422-1633: Service Pack 1)
Note that after the 2600 it has a xpsp2 - does this mean that if you have installed the latest updates from the Microsoft Windows Update server, you already have the SP2 that is due to be released?
I know that the new SP2 is basically going to be all the security updates and patches etc, with a few other security changes.
Can anybody else give feedback on the version of Windows XP that they are running and if they have the patch working or not?
It might help those who are having problems.
Thanks
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona
No I believe that would read Service Pack 2 which is still "beta" I believe I may be wrong....
However there is a new binary for it on John_K's page...
Please correct me if I am wrong
However there is a new binary for it on John_K's page...
Please correct me if I am wrong
Last edited by Cybermagellan on Thu May 27, 2004 12:10 am, edited 1 time in total.
Re: Can't find TAP-WIN32
i got that when i tried to use R1 with openvpn 2b2. Maybe if you are trying with R2 you need to install openvpn 2b2(or if you are on R1 you must have 1.6)iceboi wrote:Hi I download OpenVNC 2.0 and install it on windows xp and when I run the emulator it come up with:
[TAP-WIN32]: Enumerating TAP devices...
[TAP-WIN32]: Could not locate any installed TAP-WIN32 devices.
[IO/rtl8139] <Error> Open enetif failed: Operation not permitted
Does any one know why it does not find it? it install as new network card but program can't find it.
-
- Forum All-Star
- Posts: 587
- Joined: Mon May 17, 2004 11:57 pm
-
- Forum All-Star
- Posts: 541
- Joined: Mon May 24, 2004 5:37 am
- Location: Arizona