I followed the setup guide on the for pear pc. using a 10.4 DVD image. but when i go to start the emulator to install 10.4 it panics. i have tried it in g3 panics, g4 just sits there and twiddles its thumbs at the apple logo. am i missing something?
running on windows 10
windows 10 kernal panic installing 10.4
Moderators: Cat_7, Ronald P. Regensburg
Re: windows 10 kernal panic installing 10.4
Can you post your config file content?
Best,
cat_7
Best,
cat_7
Re: windows 10 kernal panic installing 10.4
ppc_start_resolution = "1024x768x32"
ppc_start_full_screen = 0
redraw_interval_msec = 10
pci_ide0_master_installed = 1
pci_ide0_master_image = "C:\PearPC\macosx_6gb.img"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "C:\PearPC\Virtualboxgui\Mac OS X Install DVD.iso"
pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
memory_size = 0x8000000
cpu_pvr = 0x000c0000
pci_usb_installed = 1
prom_driver_graphic = "video.x"
prom_env_machargs = ""
prom_env_bootargs = ""
prom_bootmethod = "select"
key_compose_dialog = "F11"
key_toggle_mouse_grab = "Right-Alt+Ctrl"
key_toggle_full_screen = "Alt+Return"
nvram_file = "nvram"
pci_ide0_master_type = "hd"
pci_ide0_slave_type = "cdrom"
ppc_start_full_screen = 0
redraw_interval_msec = 10
pci_ide0_master_installed = 1
pci_ide0_master_image = "C:\PearPC\macosx_6gb.img"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "C:\PearPC\Virtualboxgui\Mac OS X Install DVD.iso"
pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
memory_size = 0x8000000
cpu_pvr = 0x000c0000
pci_usb_installed = 1
prom_driver_graphic = "video.x"
prom_env_machargs = ""
prom_env_bootargs = ""
prom_bootmethod = "select"
key_compose_dialog = "F11"
key_toggle_mouse_grab = "Right-Alt+Ctrl"
key_toggle_full_screen = "Alt+Return"
nvram_file = "nvram"
pci_ide0_master_type = "hd"
pci_ide0_slave_type = "cdrom"
Re: windows 10 kernal panic installing 10.4
Hi,
Please try to set:
prom_env_machargs = "-v" (This will give you verbose booting. You can see whether there are bootable partitions on your disk).
And set the dvd image on ide0 master and the hard disk on ide0 slave.
Which version of pearpc are you running? Some did have problems reading dvd's and would only work with the 4 set CD version of 10.4 for PPC.
Best,
Cat_7
Please try to set:
prom_env_machargs = "-v" (This will give you verbose booting. You can see whether there are bootable partitions on your disk).
And set the dvd image on ide0 master and the hard disk on ide0 slave.
Which version of pearpc are you running? Some did have problems reading dvd's and would only work with the 4 set CD version of 10.4 for PPC.
Best,
Cat_7
Re: windows 10 kernal panic installing 10.4
ok, i set the -v and switched the file paths for the hdd and the dvd image in the cfg file. it still seems to spin at the apple logo (see attached pictures) i still get the same results. it jsut seems to sit, spinning at that logo
im looking for a 4 disk iso now to try that. is there a way to switch the cds from teh 4-cd set once the emulator is running?
http://imgur.com/a/q4fWM
im looking for a 4 disk iso now to try that. is there a way to switch the cds from teh 4-cd set once the emulator is running?
http://imgur.com/a/q4fWM
Re: windows 10 kernal panic installing 10.4
Is that a dmg you are using? If so, you should convert it to iso !
Use dmg2iso and convert the image. See here: http://www.sysprobs.com/convert-mac-dmg-iso-windows
Changing CDs is done by only installing the bare minimum system, then starting from the HD image while adding the next CD as slave.
Best,
cat_7
Use dmg2iso and convert the image. See here: http://www.sysprobs.com/convert-mac-dmg-iso-windows
Changing CDs is done by only installing the bare minimum system, then starting from the HD image while adding the next CD as slave.
Best,
cat_7
Re: windows 10 kernal panic installing 10.4
the image file already is an iso. idk why its showing as a dmg. it was gotten as a .toast file. i was told just to change that extension to iso