E-Maculation
https://www.emaculation.com/forum/

WinImage 9.00 (wima6490) error writting floppy disk for dos
https://www.emaculation.com/forum/viewtopic.php?f=3&t=10039
Page 1 of 1

Author:  Roarke [ Wed Jan 30, 2019 10:39 pm ]
Post subject:  WinImage 9.00 (wima6490) error writting floppy disk for dos

Image

Can someone recomend a program that can make bootable .img files one or more floppies ? In the image i tried putting dos files, in WinImage 9.00 (wima6490 on the site, for 64bit windows 7) but didn't worked.

Author:  24bit [ Wed Jan 30, 2019 11:23 pm ]
Post subject:  Re: WinImage 9.00 (wima6490) error writting floppy disk for

Did you look at rawwrite?
http://www.chrysocome.net/rawwrite
I seem to recall that a Windows 32 bit system did work best, but did not need the app for a while.

Author:  Roarke [ Thu Jan 31, 2019 12:55 pm ]
Post subject:  Re: WinImage 9.00 (wima6490) error writting floppy disk for

I used rawrite32 and taught that it is the original rawrite. It was for NetBSD and it was a mistake from me.
Quote:
You may use this tool for preparing floppy disks or ZIP media to boot NetBSD from. It takes a file called "a filesystem image" (usually with a ".fs" suffix) or a compressed variant thereof (usually with ".fs.gz" suffix) and writes it to a removeable medium. This is similar to formatting a disk with the "transfer system files" option checked.

Image
http://www.netbsd.org/~martin/rawrite32/

:cool: I will use the one you mentioned, but to do things hard for myself, i will test it on windows 7 ultimate without compatibility. I know the program is not for 7.

Author:  24bit [ Thu Jan 31, 2019 6:13 pm ]
Post subject:  Re: WinImage 9.00 (wima6490) error writting floppy disk for

Version 0.7 works fine for me with Windows 7 64 Ultimate.
I could easily write a MS DOS 6.2.2 1.4 MB image to a 1.4 MB USB floppy.
Not that I would have needed another DOS floppy, but good to know its still working. :mrgreen:
I think you could also write Mac floppies that way from disk images, but I have to give that a go (again).

Author:  Roarke [ Mon Feb 04, 2019 8:20 pm ]
Post subject:  Re: WinImage 9.00 (wima6490) error writting floppy disk for

I read somewere that WiImage is picky, as in does not support many floppy drives. You could test it for a mac trough the windows system if you want and tell me.

Author:  24bit [ Tue Feb 05, 2019 12:16 pm ]
Post subject:  Re: WinImage 9.00 (wima6490) error writting floppy disk for

Tried RawWrite with some Mac disk images and RawWrite is picky with disk images too.
It is possible to write Mac floppy images to a physical floppy, but the image must be of raw nature.
This had to be expected. ;) Hence the name RawWrite.

Creating a raw (floppy disk) image is not too hard from Terminal in macOS, but you may use this one for a trial:
https://www.magentacloud.de/lnk/L54sJsh5
As you want to place some files onto the raw disk image named 1440.dsk, best use MiniVMac.
The MiniVMac version does not matter much.
Run MiniVMac and boot with an OS of your choice.
(If you are missing a bootable volume, you may use this:
http://macintoshgarden.org/apps/macos-753-emulators 5th downlaod.)

When MiniVmac has finished booting, drag the 1440.dsk onto the MiniVMac screen.
The raw image mounts as Untitled volume. You will notice two test apps, which you may delete.
Copy the needed files to the Untitled volume, rename the volume if you want to.
Shutdown the Mac System and close MiniVMac.

If needed, take the 1440.dsk to your Windows PC.
Insert a PC formatted floppy into the PC floppy drive.
Run RawWrite 0.7 and navigate to the place where your 1440.dsk resides.
Set the opening requester to "all files" to make the 1440.dsk file visible.
Write image to floppy drive.

This way you may write 1.4 MB Macintosh floppies from Widows 10 64bit or lower.
You do need a stock "HD" 3.5" floppy drive, internal or USB obviously.
It is not possible to write 800k or 400k floppies for Macintosh that way.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/