E-Maculation
https://www.emaculation.com/forum/

GSOC qemu Boot Mac OS >= 8.5 on PowerPC system
https://www.emaculation.com/forum/viewtopic.php?f=34&t=7047
Page 1 of 83

Author:  Amade [ Tue Apr 26, 2011 2:41 pm ]
Post subject:  GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Hopefully, we can have Mac OS 9.2 emulation in qemu :D

more info:
http://www.google-melange.com/gsoc/proj ... willh/6001
http://wiki.qemu.org/Google_Summer_of_C ... _emulation

Author:  sheepmyshaver123 [ Wed Apr 27, 2011 6:52 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Amade wrote:


Did the development will finished?

Author:  Amade [ Wed Apr 27, 2011 8:51 am ]
Post subject: 

Who knows, according to timeline codings starts on 23 May and ends in August, so we will see the results then.

On qemu site it is written that only ROM is missing, and from the parts of code I read and my usage it seems so. They have PowerMac implementation with keyboard, mouse, monitor, disk, processor, openbios, so the only missing part is Mac ROM.

In the case you don't know what GSOC is, it is the Google sponsoring students to write code for open source projects.

Author:  Ambassador [ Mon May 02, 2011 6:08 pm ]
Post subject: 

In the meantime, using QEMU PPC emulation with Mac-On-Linux running inside might work.

Author:  ClockWise [ Tue May 10, 2011 8:14 am ]
Post subject: 

Just noticed that another project is to "Add Macintosh to 68k system emulation." That would be fun, too. Maybe an emulation that does things that Basilisk II does not!

Author:  Amade [ Wed May 11, 2011 6:05 pm ]
Post subject: 

ClockWise wrote:
Just noticed that another project is to "Add Macintosh to 68k system emulation." That would be fun, too. Maybe an emulation that does things that Basilisk II does not!


It would be nice, however seems like nobody wanted to do it this year or was accepted
here is a list of all accepted entries projects:
http://www.google-melange.com/gsoc/proj ... e/gsoc2011

Author:  MetalSnake [ Wed May 18, 2011 8:02 am ]
Post subject: 

Amade wrote:
ClockWise wrote:
Just noticed that another project is to "Add Macintosh to 68k system emulation." That would be fun, too. Maybe an emulation that does things that Basilisk II does not!


It would be nice, however seems like nobody wanted to do it this year or was accepted
here is a list of all accepted entries projects:
http://www.google-melange.com/gsoc/proj ... e/gsoc2011


Seems like William Hahne is doing it! :) (search for qemu in the organisation field)

edit: seems like in 2010 they had the same project: http://wiki.qemu.org/Google_Summer_of_C ... _emulation

Author:  Cat_7 [ Wed May 18, 2011 9:40 am ]
Post subject: 

Great!

August will be interesting. Or earlier for the ones that like adventure and building early qemu versions?

Best,
Cat_7

Author:  MetalSnake [ Fri Jun 24, 2011 7:40 am ]
Post subject: 

Any idea where to find the gsoc forks? I can't find anything about what is done. :(

Author:  Amade [ Thu Aug 11, 2011 9:49 am ]
Post subject: 

GSOC is coming to an end and it seems some work was done:
http://lists.nongnu.org/archive/html/qe ... 01403.html
http://lists.nongnu.org/archive/html/qe ... 01418.html

However messages doesn't mention anything about it working or not

[edit]
There is more info on openbios list
http://lists.openbios.org/pipermail/ope ... 06613.html
Quote:
While Mac OS does not yet fully boot, with these patches I have gotten the Mac OS 10.2 kernel to load and begin booting.

Author:  IPalindromeI [ Thu Aug 11, 2011 10:59 am ]
Post subject: 

Basically X will run, hoping lower versions will. PearPC apparently now has competition :)

Author:  Amade [ Tue Jun 05, 2012 11:05 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

So I decided to give qemu a try, I used patched bios here are results:

Mac OS X 10.0
Image
It smiles :D
Image
Loading modules
Image
And it stops :(

Mac OS X 10.2
Image
The apple!
Image
Also stops :cry:

Seems to me like it fails while initializing graphics

How to:

Get openbios (http://www.openfirmware.info/OpenBIOS):
Code:
svn co svn://openbios.org/openbios/trunk/openbios-devel


You also need powerpc crosscompiler (Somethink like: powerpc-unknown-linux-gnu-gcc etc.)
(If using gentoo just run: "crossdev powerpc-unknown-linux-gnu")

Apply patches:
http://lists.openbios.org/pipermail/ope ... 06653.html
http://lists.openbios.org/pipermail/ope ... 06615.html
http://lists.openbios.org/pipermail/ope ... 06616.html
http://lists.openbios.org/pipermail/ope ... 06617.html
http://lists.openbios.org/pipermail/ope ... 06623.html
http://lists.openbios.org/pipermail/ope ... 06618.html
http://lists.openbios.org/pipermail/ope ... 06619.html - Note that lines having only "\" need space after "\" so they should be "\ "
http://lists.openbios.org/pipermail/ope ... 06620.html
http://lists.openbios.org/pipermail/ope ... 06651.html
http://lists.openbios.org/pipermail/ope ... 06702.html

you may need to edit function select_prefix on line 100 in ./config/scripts/switch-arch to be
Code:
for TARGET in ${1}-unknown-linux-gnu- ${1}-linux-gnu- ${1}-linux- ${1}-elf- ${1}-eabi-


Build:
Code:
cd openbios-devel
./config/scripts/switch-arch qemu-ppc

#always do this after editing any file
make clean

make


Your bios is in ./obj-ppc/ named openbios-qemu.elf

Here is what I got:
http://free-uploading.com/t0uwrodvvxkz/ ... u.elf.html

How to run qemu if booting from existing CD:
qemu-system-ppc -bios path_to_your_bios/openbios-qemu.elf -cdrom /dev/cdrom -boot d -m 1024

Or if like me you have images to not throw CD's around
qemu-system-ppc -bios path_to_your_bios/openbios-qemu.elf -cdrom path_to_your_image -boot d -m 1024

Author:  Amade [ Thu Jun 07, 2012 1:39 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

So I got a bit further today, I was right the problem was graphics, it needs 32bit depth

Mac OS X 10.2
Image

Mac OS X 10.0
Image

New command is:
Code:
qemu-system-ppc -bios path_to_your_bios/openbios-qemu.elf -cdrom /dev/cdrom -boot d -m 1024 -g 800x600x32

Note -g 800x600x32 at the end

Author:  adespoton [ Wed Jun 27, 2012 4:40 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Congrats! You've got as far as I did, although I was using the default openbios in a patched version of qemu-ppc.

As PearPC's going to be faster at emulating 10.1 and later, I've been focusing on 9.1 through 10.0; when you trace down the panic, please post what you did to get past that point!

Interestingly, qemu appears to be the only thing that emulates the PPC MMU -- which is why 9.1 through 10.0 will only ever have a hope of running on qemu.

Author:  adespoton [ Sun May 05, 2013 8:20 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Did anyone get further on this?

Author:  Amade [ Sun May 05, 2013 3:53 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

You are right on time :D, there was new release of openbios with changes merged just few days ago.
http://lists.openbios.org/pipermail/ope ... 07700.html
And new bios was put into qemu development tree, so you can probably try this (although from my tests openbios still needs to be patched https://lists.nongnu.org/archive/html/q ... 01418.html or changed from openbios prompt)

There is still problem with "Waiting for root device" on 10.2, 10.4 (and some darwinppc releases) and 10.0 still panics, I'm slowly working on this (setting up pearpc to build kernel with debugging enabled). As far as I can tell, there are problems with how disk access is emulated (ATAPI or something next to it).

Author:  Amade [ Sat Jun 29, 2013 11:21 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Preview of things to come, thanks to work of QEMU & OpenBIOS maintainers, it's still a work in progress so I'm not posting any instruction. (https://github.com/agraf/qemu/commits/macos and http://tracker.coreboot.org/trac/openbi ... bios-devel)

Image

good thing is it seems to boot some of cd's which doesn't run in pearpc :smile:
bad is that it seems somehow slower :(

Author:  Cat_7 [ Sat Jun 29, 2013 9:16 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Great! I am curious to see where this goes.

Best,
Cat_7

Author:  adespoton [ Sun Jun 30, 2013 8:01 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Me too... I see a lot of potential now that these updates have been committed :D
We might even be able to run OS 9.2.2 and 10.0.4!
And once these changes have been debugged, we might even be able to wrap a PearPC interface around QEmu (who am I kidding... I'll be creating stand-alone blobs).

Author:  Cat_7 [ Sun Jun 30, 2013 8:54 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

I've been trying to get openbios built. Seems it is not that easy. On PPC mac the eabi compiler is missing, etc. Next try: cross compiling on cygwin.

Best,
Cat_7

Author:  Cat_7 [ Sun Jun 30, 2013 11:36 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Given up! A PM is always welcome!

Best,
Cat_7

Author:  Amade [ Fri Jul 05, 2013 3:21 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

To compile openbios you need powerpc compiler or crosscompiler, on system there should be something like powerpc-unknown-linux-gnu-gcc

cd openbios-devel
./config/scripts/switch-arch qemu-ppc
make

Author:  Cat_7 [ Fri Jul 05, 2013 4:55 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Yes, that is what I tried on PPC Mac OS X 10.5.8 on my G5
I came up with an error that the "eabi" compiler is missing.

Best,
Cat_7

Author:  airat78 [ Thu Jul 11, 2013 10:26 am ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Is it will be nightly builds for qemu openbios? Don't want compile each version

Author:  uyjulian [ Fri Jul 12, 2013 8:17 pm ]
Post subject:  Re: GSOC qemu Boot Mac OS >= 8.5 on PowerPC system

Wow, I wonder where this is going to go...

Page 1 of 83 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/