Login  •  Register


The time is now: Sat Sep 22, 2018 8:42 am

Emaculation wiki  •  Delete all board cookies



Post new topic  Reply to topic Page 2 of 2 [ 33 posts ]    Go to page Previous  1, 2
Print view Previous topic  |  Next topic
Author Message
PostPosted: Sun Jul 26, 2015 10:57 pm 
Offline
Space Cadet

Joined: Sun Jul 26, 2015 10:47 pm
Posts: 1
I can report success with BasiliskII emulating a Mac Iici (OS 7.5.5) on a MacBook Pro running Yosemite having two way AppleTalk file transfers with a physical Mac Plus (OS 7.5.5). Great stuff - Thanks!


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Mon Jul 27, 2015 5:20 am 
Offline
Expert User
User avatar

Joined: Fri Feb 13, 2004 8:59 am
Posts: 4395
Location: Sittard, The Netherlands
Hi,

Thanks for the feedback!

Best,
Cat_7


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Sat Nov 21, 2015 9:14 pm 
Offline
Space Cadet

Joined: Sat Nov 21, 2015 11:24 am
Posts: 2
This method doesn't work on Yosemite... I installed the specified package, the kernel extension is loaded and in /dev I can find tap0,tap1... up to 15 and tun0,tun1... as well, but tap0 is not recognized as a network interface.
If I execute
Code:
ifconfig tap0
I get
Code:
ifconfig: interface tap0 does not exist

There's also a newer version on the tuntaposx site, but it's all the same.


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Sun Nov 29, 2015 8:52 am 
Offline
Space Cadet

Joined: Sat Nov 21, 2015 11:24 am
Posts: 2
Hi! Thank you for these builds, I checked them and I found that the etherhelper is working for me on a Mac OS X 10.10 computer, but unfortunately only the 32bit version. If I try to launch the 64bit ones (I tried all of them) from Terminal, i get
Code:
Killed: 9
and in the system log i read
Code:
Cannot enforce a hard page-zero for ./BasiliskII

I searched on Google and found that is a Yosemite problem for some 64bit executables. It's something that must be fixed during the compilation of the sources.
Can you have a look?
Thanks


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Sat Jan 06, 2018 5:57 pm 
Offline
Inquisitive Elf
User avatar

Joined: Thu Apr 06, 2017 9:32 am
Posts: 30
Hi all,

I am on OS X 10.12.6 (Sierra) and tried to run BasiliskII accessing my AppleShare on the LAN.

Only the 32-Bit Version from Cat_7 works for me: http://www.open.ou.nl/hsp/downloads2/Ba ... er-SDL.zip

BasiliskIIGUI network settings are "etherhelper/tap0/bridge0/en0"

Further it was necessary to amend the start script specific to my app properties:

#!/bin/bash
sudo /Users/YourUserAccountHere/BasiliskII/BasiliskII.app/Contents/MacOS/BasiliskII & sleep 10
sudo ifconfig bridge0 create
sudo ifconfig bridge0 addm en0
sudo ifconfig bridge0 up
sudo ifconfig bridge0 addm tap0

It is really great to use the AppleShares on my LAN and I am very impressed about the great work this group lined up!
Next is CUPS printer sharing, I am exited if that also works.

Any success with High Sierra yet?

Best,
Knuddlmac


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Sun Jul 29, 2018 10:32 am 
Offline
Space Cadet

Joined: Wed Jul 11, 2018 11:39 am
Posts: 2
Hoping the hive mind could help me out…

I got Basilisk (special version w/ AppleTalk support) networked with a Mac SE (w/ Ethernet card) over a crossover cable. The SE has two boot partitions -- one with System 6 and one with System 7. I can transfer files back and forth, but only if I boot the SE into System 7, set it up as an AppleTalk server and mount its drive as a network share on the Basilisk VM. Neither one of the SE systems can “see" the BII AppleTalk server.

I would prefer to use the Basilisk VM as the server, especially if I could connect to it from the System 6 partition on the SE.

I’m sure I'm missing some critical setting or software version somewhere, but I can’t for the life of me figure out what it is…

Full (?) tech specs:

BasiliskII VM host is a 2009 Mac Mini (Core 2 Duo) running OS X 10.11.6 (El Cap).
  • Firewall is off
  • WiFi is off
  • Ethernet (configured manually): IP address 10.0.017; Subnet mask 255.255.255.0; Router 10.0.0.11

Basilisk is using the Performa ROM and running System 7.5.3
  • Chooser 7.5.4: AppleTalk Active
  • Network 3.0.3:
    • AppleTalk Connection = EtherTalk Built In
    • AppleTalk version 58.1.5
    • EtherTalk Version 2.5.7
  • MacTCP 2.0.6:
    • Ethernet (configured manually)
    • IP address 10.0.0.13
    • Subnet Mask 255.255.255.0
    • Gateway address 10.0.0.11
  • File Sharing Monitor: Shared items = MacOS753
  • Users & Groups: Allow user <Me> & Guest to connect
  • Sharing Setup : Sharing on
The SE has an Asante Ethernet card, 4MB RAM and a 2GB HD partitioned into three volumes (two 20MB boot partitions and a 1.3GB (?) "stuff" partition).

System 6:
  • Chooser 3.6: AppleTalk Active
  • Network 3.0.2:
    • AppleTalk Connection = EtherTalk Alternative
    • AppleTalk version 58.1.4
    • LocalTalk Version 58.2.2
  • MacTCP 2.1:
    • Ethernet Built-in (configured manually)
    • IP address 10.0.0.11
    • Subnet Mask 255.255.255.0
    • Router address 10.0.0.13
  • Relevant files in System Folder:
    • AppleShare
    • AppleShare prep
    • AppleTalk
    • Backgrounder
    • EtherTalk Phase 2
    • MacTCP DNR
    • Mac TCP Prep
    • Network
    • Responder
    • MacTCP
  • Files not in System folder (because they don't seem to do anything and/or they cause crashes):
    • SNMP MacAgent Prep
    • SNMP MacAgent

System 7:
  • Chooser 7.2: AppleTalk Active
  • Network 3.0.2:
    • AppleTalk Connection = EtherTalk Alternative
    • AppleTalk version 57.0.4
    • EtherTalk Version 2.5.6
  • MacTCP 2.0.6:
    • Ethernet Built-in (configured manually)
    • IP address 10.0.0.11
    • Subnet Mask 255.255.255.0
    • Router address 10.0.0.13
  • Relevant files in System Folder:
    • MacTCP DNR
    • Control Panels
      • MacTCP
      • Network
    • Extensions
      • AppleShare
      • EtherTalk Phase 2
      • EtherTalk Prep
      • Network Extension
    • Preferences
      • MacTCP Prep

Why can't either if the Mac SE systems "see" the BasiliskII AppleShare server?

TIA for any help.


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Sun Jul 29, 2018 10:57 am 
Offline
Expert User
User avatar

Joined: Fri Feb 13, 2004 8:59 am
Posts: 4395
Location: Sittard, The Netherlands
Hi,

I'm trying to understand your setup.
You are using the SE as router for the Basilisk VM?
In Basilisk you have 10.0.0.13 as IP and 10.0.0.11 as gateway (router).
And in the SE you have 10.0.0.11 as IP and 10.0.0.13 as router.

I guess all should have the same router, but different IP addresses.

Don't you have a central router address?

You can try the command "sudo tcpdump –i en0" in a terminal to see whether your Basilisk VM advertises itself as a fileserver on your network. That is, if en0 is your non-wifi network card in OSX. Otherwise check with "ifconfig" what is the name of your network card and substitute en0 with the correct name.

See here: https://www.emaculation.com/doku.php/ap ... leshooting

Best,
Cat_7


Top
 Profile  
Reply with quote Post a reply  
PostPosted: Sun Jul 29, 2018 12:14 pm 
Offline
Space Cadet

Joined: Wed Jul 11, 2018 11:39 am
Posts: 2
Cat_7 wrote:
I'm trying to understand your setup.
You are using the SE as router for the Basilisk VM?
In Basilisk you have 10.0.0.13 as IP and 10.0.0.11 as gateway (router).
And in the SE you have 10.0.0.11 as IP and 10.0.0.13 as router.

I guess all should have the same router, but different IP addresses.

Don't you have a central router address?



Thanks for the reply.

I’m using a crossover Ethernet cable to connect the SE directly to the Mac running the Basilisk VM. No router, therefore no central router address. I assumed each machine sees the other as the router, so I set up the IP addresses accordingly.

I will try the terminal commands and report back…


Top
 Profile  
Reply with quote Post a reply  
Display posts from previous:  Sort by  
Post new topic  Reply to topic Page 2 of 2 [ 33 posts ]    Go to page Previous  1, 2


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
 

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group