E-Maculation
https://www.emaculation.com/forum/

Full screen not scaling correctly
https://www.emaculation.com/forum/viewtopic.php?f=6&t=9305
Page 1 of 1

Author:  mtonak [ Sun Apr 23, 2017 3:07 am ]
Post subject:  Full screen not scaling correctly

I just set up Basalisk II last night and everything was running fine but now when I use full screen mode, it doesn't scale properly. Depending on what I set the resolution too, it is either super tiny and in a corner of my screen, or is too large and is cropped. I can't think of anything that I changed but full screen mode was working fine previously. Windowed mode still works as expected.

Too small
https://goo.gl/photos/6DYbVVb4tcduaez68

Too big and cropped
https://goo.gl/photos/B45iHDFWsePFWw886

Here's what I have in my prefs file:

Code:
disk /Users/mtonak/Desktop/BasiliskII/hfv500M_sys755_clean.dsk
extfs /Users/mtonak/Desktop/BasiliskII/Shared
screen dga/0/0
seriala
serialb
ether slirp
udptunnel false
udpport 6066
rom /Users/mtonak/Desktop/BasiliskII/PERFORMA.ROM
bootdrive 0
bootdriver 0
ramsize 134217728
frameskip 0
modelid 14
cpu 4
fpu true
nocdrom false
nosound false
noclipconversion false
nogui false
jit true
jitfpu true
jitdebug false
jitcachesize 8192
jitlazyflush true
jitinline true
keyboardtype 5
keycodes false
mousewheelmode 1
mousewheellines 3
dsp /dev/dsp
mixer /dev/mixer
ignoresegv true
idlewait true


Any help is appreciated!

Author:  Ronald P. Regensburg [ Sun Apr 23, 2017 7:23 am ]
Post subject:  Re: Full screen not scaling correctly

mtonak wrote:
I can't think of anything that I changed but full screen mode was working fine previously.

Was it working fine before on the same host, same hardware, same OS? If not, what is different now?

Author:  24bit [ Sun Apr 23, 2017 11:31 am ]
Post subject:  Re: Full screen not scaling correctly

Isn´t "dga/0/0" rather odd?
I would make it dga/1600/1200 or similar, depending on your display´s hardware resolution.
You will have to set the screen res on the Mac side too usually, once the Mac has booted.
Not a big thing. Control Panels / Monitors / Options it is in 7.5.5 methinks.

Author:  Ronald P. Regensburg [ Sun Apr 23, 2017 1:08 pm ]
Post subject:  Re: Full screen not scaling correctly

dga/0/0 is the regular setting for maximum size full screen at the actual host screen resolution. It may not work as expected on ultra high resolution (Retina) screens.

Author:  mtonak [ Mon Apr 24, 2017 3:12 am ]
Post subject:  Re: Full screen not scaling correctly

So I switched it back to 1024x768 (which I had done several times before) and it is working now. It even works on maximum.

¯\_(ツ)_/¯

Thanks for the fast responses!

Author:  mtonak [ Tue Apr 25, 2017 10:28 pm ]
Post subject:  Re: Full screen not scaling correctly

It happened again. I added a new volume in BasiliskIIGUI and clicked Start and everything was cropped off again. I then tried removing the volume but it was still cropped.

I use Crashplan to backup my computer so I'm going to try rolling the prefs file back to a copy from yesterday to see if that fixes it.

Author:  24bit [ Wed Apr 26, 2017 10:41 am ]
Post subject:  Re: Full screen not scaling correctly

Just had a similar issue after removing my now obsolete SCSI HBA from a W98SE rig.
Mac screen way too large and W98SE frozen.
I did delete Basilisk II prefs and Mac pram and it looks fine for now.


Off topic:
Any takers for a Tekram DC-315U? http://www.tekram.com/dc-315u-ultra-scsi-host-adapter/

Author:  adespoton [ Wed Apr 26, 2017 9:15 pm ]
Post subject:  Re: Full screen not scaling correctly

I've had this issue before and needed to delete the pram file to fix it. Prefs file can stay.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/