SheepShaver Windows Executable
Moderators: Cat_7, Ronald P. Regensburg, ClockWise
-
- Space Cadet
- Posts: 2
- Joined: Mon Dec 13, 2004 3:53 pm
- Location: Brasil
SheepShaver Executable
Hello,
tank you... I can install WinXP in my computer...
Michel... 8)
tank you... I can install WinXP in my computer...
Michel... 8)
-
- Space Cadet
- Posts: 6
- Joined: Sun Aug 29, 2004 7:45 pm
Thanks to GB for this update. I could never get SheepShaver to run under colinux even though I successfully learned how to compile it correctly. Learning to do that right is a daunting task for a Linux noob such as myself.
This new windows version runs, though it's highly unstable. I find myself having to count to 3 before clicking again. Any faster clicking and it can crash.
I know this is only the second build, but so far, it's great.
I want to ask.
Is there hope for improvement from GB? Or is the improvement based upon other parties developement?
This new windows version runs, though it's highly unstable. I find myself having to count to 3 before clicking again. Any faster clicking and it can crash.
I know this is only the second build, but so far, it's great.
I want to ask.
Is there hope for improvement from GB? Or is the improvement based upon other parties developement?
-
- Expert User
- Posts: 868
- Joined: Sat Aug 30, 2003 4:15 pm
- Location: UK
- Contact:
-
- Mac Mechanic
- Posts: 186
- Joined: Mon Jul 05, 2004 10:49 pm
- Location: Woodway, Texas, USA
- Contact:
No! You can run 7.5 on it... Any MacOS PPC compatible will run except OSX and 9.2.2, 9.2.1, 9.1. I am Installing 7.5.3 w/o JIT (sloooow..... but very stable) I will tell you how it goes.Marc wrote:It supports Mac OS 8.5 through to 9.04, I understand
>Neospy 8)
EDIT: Sorry, 7.5.3 does the happy mac and the "Welcome to Macintosh". What's the problem???
No Boot
Hi there
Am new to this forum, a merry Christmas to all first!! :D I have been trying real hard to make SheepShaver work in Windows but zilch! I got the executable, then i saved my PowerMac 7300 rom and transferred it to Windows (4MB), the darn thing was not good.. I then followed the procedure to extract the rom from the 8.5 CD. That went OK. I got no error messages, i got all Mac OS'es from 7.5.3 upwards, i tried them all, i even compared my prefs file to other people's from this forum, i even tried booting with Yellow Dog, plus tried even the BeOS... No results. I first thought it would take some time to boot. But waiting more than 4 hours, is more than enough. I only get a black window, no errors, no smiling Aaron, no nothing. It isn't a matter of horsepower if you suspect that. (P4 @ 2.8 512 MB RAM) Anyclue as to what goes on? The machine isn't frozen. It just sits like waiting for something. I even tried a pre-formatted .hfv image from my Basilisk setup just in case it would boot, but no result..
Thanks in advance
Am new to this forum, a merry Christmas to all first!! :D I have been trying real hard to make SheepShaver work in Windows but zilch! I got the executable, then i saved my PowerMac 7300 rom and transferred it to Windows (4MB), the darn thing was not good.. I then followed the procedure to extract the rom from the 8.5 CD. That went OK. I got no error messages, i got all Mac OS'es from 7.5.3 upwards, i tried them all, i even compared my prefs file to other people's from this forum, i even tried booting with Yellow Dog, plus tried even the BeOS... No results. I first thought it would take some time to boot. But waiting more than 4 hours, is more than enough. I only get a black window, no errors, no smiling Aaron, no nothing. It isn't a matter of horsepower if you suspect that. (P4 @ 2.8 512 MB RAM) Anyclue as to what goes on? The machine isn't frozen. It just sits like waiting for something. I even tried a pre-formatted .hfv image from my Basilisk setup just in case it would boot, but no result..
Thanks in advance
- Trombone Bob
- Tinkerer
- Posts: 83
- Joined: Mon Apr 26, 2004 3:32 pm
- Location: Utah, USA
no boot continues...
Well, maybe i'm not getting this clear to you: as i said, my PM 7300 rom did not work, thus, i used the one from the 8.5 CD as described in the guide. That didn't give me any errors. And as i stated, i tried all the OS'es i got 7.5.3 upwards, which means i also tried 7.5.5, 8.0, 8.1, 9.0, and so forth, even up to 10.3 Does this cover my attempts? All i'm saying, is why don't i get even a start-up image, say just the smiley Aaron, to let me know something's being read from the CDs.. My Oses are original, the CD-ROM drive seems to be reading something at the start, but the SheepShaver window remains black.. Any idea?
Thanks once again,
Sally
Thanks once again,
Sally
boot problem
Thanks for the detail Cat,
I'll get the update bin, and if it works i'll let you know. Hope that's all thats left to it...
I'll get the update bin, and if it works i'll let you know. Hope that's all thats left to it...
Does the ROM For MoL work? That's the one I'm using.Cat_7 wrote:@sal54:
The rom off the 8.5 cd doesn't work in windows. You need the Mac OS Rom file from the rom update from the apple site to get your video correct.
Best wishes
Cat_7
EDIT: I mean does it work for other people, because it doesn't for me.
It finally was the ROM version. As Cat said, the one from the Apple site was the one that worked in Windows..
That said, i easily installed the 8.5 OS, which took about 10 minutes to finish, and off i went. I now seem to have another problem. For the first couple of times, the emulator worked fine. Now, if i don't turn the extensions off at startup, i get to a point where i get a Visual C++ Runtime Error and the emulator quits Any idea?
That said, i easily installed the 8.5 OS, which took about 10 minutes to finish, and off i went. I now seem to have another problem. For the first couple of times, the emulator worked fine. Now, if i don't turn the extensions off at startup, i get to a point where i get a Visual C++ Runtime Error and the emulator quits Any idea?
post your current config:sal54 wrote:It finally was the ROM version. As Cat said, the one from the Apple site was the one that worked in Windows..
That said, i easily installed the 8.5 OS, which took about 10 minutes to finish, and off i went. I now seem to have another problem. For the first couple of times, the emulator worked fine. Now, if i don't turn the extensions off at startup, i get to a point where i get a Visual C++ Runtime Error and the emulator quits Any idea?
H, what is it exactly you mean by current config? Would you mean the prefs file, or the hardware setup of my PC?
if prefs is what you want, here goes:
extfs
disk Boot.hfv
rom Mac OS.rom
windowmodes 3
screenmodes 63
seriala FILE
serialb FILE
bootdrive 0
bootdriver 0
ramsize 65554432
frameskip 8
gfxaccel true
nocdrom false
nonet true
nosound false
nogui true
noclipconversion false
ignoresegv true
jit false
jit68k false
keyboardtype 5
keycodes false
mousewheelmode 1
mousewheellines 3
idlewait true
keycodes false
mousewheelmode 1
mousewheellines 3
enableextfs false
debugextfs false
cdrom g:\
ignoresegv true
extdrives CDEFGHIJKLMNOPQRSTUVWXYZ
pollmedia true
if hardware is what you mean, it's a P4 @ 2.8Ghz with 512 RAM, the hard disk is a 500 MB file, and the current OS is 8.5 Anything else?
Thanks again,
Sally
if prefs is what you want, here goes:
extfs
disk Boot.hfv
rom Mac OS.rom
windowmodes 3
screenmodes 63
seriala FILE
serialb FILE
bootdrive 0
bootdriver 0
ramsize 65554432
frameskip 8
gfxaccel true
nocdrom false
nonet true
nosound false
nogui true
noclipconversion false
ignoresegv true
jit false
jit68k false
keyboardtype 5
keycodes false
mousewheelmode 1
mousewheellines 3
idlewait true
keycodes false
mousewheelmode 1
mousewheellines 3
enableextfs false
debugextfs false
cdrom g:\
ignoresegv true
extdrives CDEFGHIJKLMNOPQRSTUVWXYZ
pollmedia true
if hardware is what you mean, it's a P4 @ 2.8Ghz with 512 RAM, the hard disk is a 500 MB file, and the current OS is 8.5 Anything else?
Thanks again,
Sally
Hi there,
Quite some time without posts.. Well, SheepShaver has been running now the last few days, it appears experimenting with the settings in the _prefs script gives various results. The last thing i recall is trying the jit false jit true switch, which actually changed the emulator's behaviour. The program isn't very stable, but when it runs, it is quite sat.
What i am trying to do now is use Toast to burn CD's has anyone managed? I suspect this has to do with SCSI drives, so if anyone has a SCSI CD-R let us know..
Sally
Quite some time without posts.. Well, SheepShaver has been running now the last few days, it appears experimenting with the settings in the _prefs script gives various results. The last thing i recall is trying the jit false jit true switch, which actually changed the emulator's behaviour. The program isn't very stable, but when it runs, it is quite sat.
What i am trying to do now is use Toast to burn CD's has anyone managed? I suspect this has to do with SCSI drives, so if anyone has a SCSI CD-R let us know..
Sally
How to fix SOME of the major instabilities
I found that if you use the sheepshaver and have a lot of instability, just enable normal JIT but disable JIT 68k emulation, while it does slow it down some, it's 1000% more stable, I've been able to play a bunch of my old mac games on it (Might & Magic III, and other games), not the 30 seconds or 2-3 clicks that I tend to see a lot of messages about locking it up. While it's not perfect, it's MUCH more usable. Now all we need to do is incorporate networking into the Windows version, and possibly use the sound driver from SS for PearPC.