PearPC: PPC Emulation?!

[ARCHIVED] About PearPC, a mostly obsolete PPC Mac emulator for Windows and Linux to run MacOS X 10.1 up to 10.4. Using QEMU is now recommended.

Moderators: Cat_7, Ronald P. Regensburg

Locked
User avatar
ClockWise
Site Admin
Posts: 4397
Joined: Mon May 20, 2002 4:37 am
Location: Uiwang

PearPC: PPC Emulation?!

Post by ClockWise »

Talk about PearPC.

Link: http://pearpc.sourceforge.net/index.html

The Slashdot story:

http://developers.slashdot.org/article. ... 187&tid=99

"We have finally released version 0.1 of our PowerPC architecture emulator: PearPC. The emulator itself is (prepared to be) architecture independent but only tested on x86s (here you go porters...). It also features a must faster just-in-time compilation unit for x86 hosts. This means that you can now run your favourite PowerPC-OS on x86: Mandrake Linux (9.1), Darwin (6 + 7) and Mac OS X (10.3)! And the best things is: it's GPL'd. But be warned: it's experimental.."
ivanhasyou
Student Driver
Posts: 23
Joined: Wed Jan 08, 2003 2:26 am
Location: Right behind you!

Post by ivanhasyou »

can i say, wiihaw :)

Im going to see if i can get macosx crawling on it :p
User avatar
ClockWise
Site Admin
Posts: 4397
Joined: Mon May 20, 2002 4:37 am
Location: Uiwang

Post by ClockWise »

Screenshots of everything, puh-lease.
Gwenole

Post by Gwenole »

Hehe, I had thought two other projects would have be released first: the one from Charles Mason (unnamed) and SoftPear (Michael Steil et al.). I really did not know about PearPC.
MaxFrames

Post by MaxFrames »

So, finally someone managed to do it! :D
I s'pose it will never ever run on Windows tho, right?
Marc
Master Emulator
Posts: 357
Joined: Wed Aug 20, 2003 2:14 pm

Post by Marc »

weeeeeee! approx a 5MHz G3!!

Sarcasm aside, this is a BIG breakthrough. Perhaps the coders should take some of Gwneole's ideas (on AlitVec emulation, etc.)

OS X on x86 though...surely a myth?!
MiLToS_666
Inquisitive Elf
Posts: 34
Joined: Wed Jun 25, 2003 4:13 pm
Location: GREECE

Post by MiLToS_666 »

This emulator runs on Windows too, the binary is available to download.
About Mac OS X, the author comments:

"Mac OS X 10.3: Runs well with some caveats"

And also check the screenshots on his site showing Mac OS X installing!
The shinny look of X sends shivers down my spine...

Hmmm... Right now I wish I had a Mac OS X CD to test this... :)
I'm trying to boot and install Mac OS 8.6 UK now...
Having some problems with the cdrom not recognised as bootable.
I will try make a proper ISO image out of it cause I don't thing WinImage made a correct one.

MiLToS_666
Guest

Post by Guest »

It's a shame it can't just use your cdrom drive, I really don't feel like making an image of my Panther cds.
MiLToS_666
Inquisitive Elf
Posts: 34
Joined: Wed Jun 25, 2003 4:13 pm
Location: GREECE

Post by MiLToS_666 »

But how can I make a proper ISO out of a Mac CD under Windows?
I tried some CD-2-Iso programs with no luck...

MiLToS_666
Jackalo
Granny Smith
Posts: 119
Joined: Wed Jun 26, 2002 10:23 pm
Location: Illinois, USA
Contact:

Post by Jackalo »

Gemulator Explorer can make IMG files that PearPC can load.

Just select the CD-ROM from the list on the left, then File > Create Image From Physical Disk.

I saved mine as macosx.img and macos9.img.
Guest

Got it to run in windows..

Post by Guest »

1. I took my panther cd's and made .iso files in alcohol 120%

2. Then I downloaded pearpc (jit version for windows) and the 6 gig hard drive file.

3. Then I downloaded the darwin boot cd and partitioned it like the site said

4. Booted off of OSX cd

ooooooh, so slow but so pretty, can't believe it works!
MiLToS_666
Inquisitive Elf
Posts: 34
Joined: Wed Jun 25, 2003 4:13 pm
Location: GREECE

Post by MiLToS_666 »

No luck here...
I used Gemulator Explorer to make images but the disks don't seem to be read correctly and PearPC doesn't accept the images.
Also in Alcohol 120%... How can I make an ISO from it? The only choice I'm given when I try to make an image is an .mds file and .ccd file.
The resulting .mds and .mdf image from my Mac OS 8.6 UK and GR cds is not recognised as bootable again... :cry:
Help... Please??? :roll:
I just wish PearPC had an interface that you could select options and also use real CD-ROM drives like SheepShaver.

MiLToS_666

P.S. It seems that many people bitch at SheepShaver now... This is wrong! The authors of these emulators must collaborate and produce a great emulator that will run Mac OS X under Windows!!!
kvd
Space Cadet
Posts: 3
Joined: Tue May 04, 2004 10:33 pm

image

Post by kvd »

hey, i do this, it's the easiest for me, and the program is free...

www.burnatonce.com

load the disc in, go to read/copy/read to image
Marc
Master Emulator
Posts: 357
Joined: Wed Aug 20, 2003 2:14 pm

Post by Marc »

Maybe the problem is th app doesn't support the classic Mac OS. Maybe some issue with a ROM. All the OSes listed are *nix ones anyway.
grayfox
Tinkerer
Posts: 49
Joined: Thu May 13, 2004 2:42 am

Post by grayfox »

yah i hope they resolve that by the next version
PGHammer

*More* PearPC screenies (and install guides)

Post by PGHammer »

If you hie over to NEOWIN (http://www.neowin.net) and go to the Windows NT/2000/XP Client section of their forums, you'll find moire tips on installing PearPC, more screenshots (including one of my own Panther-based PearPC setup with both About This Mac *and* My Computer Properties from XP on display at the same time), etc.

I've added PearPeeler to the mix since then, and imported my working configuration. The only change I made since installing PearPeeler was doubling the RAM (256 MB vice 128). Performance is a *lot* snappier.


Queston: Can I substitute a second HD for the CD-ROM post-install? I'm thinking of creating a disk image of various OS X apps and mounting it via PearPeeler.
Mac Emu
Forum All-Star
Posts: 1208
Joined: Mon May 20, 2002 11:50 am
Location: Ouraion

Post by Mac Emu »

Yes. I'm doing so right now.

pci_ide0_master_installed = 1
pci_ide0_master_image = "D:\Apps\Emu\PearPC\macos10.2.8.img"
pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "D:\Apps\Emu\PearPC\c.img"
pci_ide0_slave_type = "hd"
Locked