Bought sound designer 1.5, but
Moderators: Cat_7, Ronald P. Regensburg, ClockWise
Bought sound designer 1.5, but
I have sheepshaver running on a macbook pro 2016.
Very nice. I've been using Turbosynth succesfully.
I bought Sound designer 1.5 because you can make samples for many different samplers. Ive got MIRage I want to make sounds for, but sound designer is not working.
Maybe because it uses Midi?
I get this error upon opening
"This Window cannot be opened because SDTemp-708109321"
I can't open a sound file or make a new file to draw a sound. Nothing works.
Help , and Thank you
I should note that an early version of turbosynth also doesnt work
Very nice. I've been using Turbosynth succesfully.
I bought Sound designer 1.5 because you can make samples for many different samplers. Ive got MIRage I want to make sounds for, but sound designer is not working.
Maybe because it uses Midi?
I get this error upon opening
"This Window cannot be opened because SDTemp-708109321"
I can't open a sound file or make a new file to draw a sound. Nothing works.
Help , and Thank you
I should note that an early version of turbosynth also doesnt work
- adespoton
- Forum All-Star
- Posts: 4277
- Joined: Fri Nov 27, 2009 5:11 am
- Location: Emaculation.com
- Contact:
Re: Bought sound designer 1.5, but
Sounds like Sound Designer is trying to write a temp file somewhere it doesn't have write permissions. Do you have it installed on the boot partition of your SheepShaver OS 9 image? If so, did you install a full OS 9 on the image, or just use the preinstalled image from Redundant Robot that doesn't contain most of the software needed to support audio and video?
Re: Bought sound designer 1.5, but
I followed this video
https://www.youtube.com/watch?v=XQAf7GII9NY
Funny thing. Turbosynth stopped working. UNTIL I turned bluetooth back on.
This is all in the latest sierra
https://www.youtube.com/watch?v=XQAf7GII9NY
Funny thing. Turbosynth stopped working. UNTIL I turned bluetooth back on.
This is all in the latest sierra
Re: Bought sound designer 1.5, but
Im afraid to install sound designer again as I got Turbosynth going, after a redo. I have a g4 i can use SD with
Re: Bought sound designer 1.5, but
I did everything that kid did in the video. Works well. Except the SD problem
Only thing Ive done different is I moved the Sheepshaver folder to my applications folder in Sierra. but I installed turbosynth. (or unpacked it) via OS 9 sheepshaver
Only thing Ive done different is I moved the Sheepshaver folder to my applications folder in Sierra. but I installed turbosynth. (or unpacked it) via OS 9 sheepshaver
- adespoton
- Forum All-Star
- Posts: 4277
- Joined: Fri Nov 27, 2009 5:11 am
- Location: Emaculation.com
- Contact:
Re: Bought sound designer 1.5, but
I think I may be confused about what you're trying to do here. Does this line up?
Host OS OS X 10.12 on 2016 MBP
Guest OS: Mac OS 9.0.4 (full install from CD image) on SheepShaver running in 32-bit mode.
Guest software: Sound Designer 1.5, installed in the Applications folder on the Mac OS 9.0.4 Macintosh HD volume.
Is this correct?
The MIDI functions will not work (MIDI does not work in SheepShaver) but the rest of SD should work.
Any reason you went with 1.5 instead of Sound Designer II?
Host OS OS X 10.12 on 2016 MBP
Guest OS: Mac OS 9.0.4 (full install from CD image) on SheepShaver running in 32-bit mode.
Guest software: Sound Designer 1.5, installed in the Applications folder on the Mac OS 9.0.4 Macintosh HD volume.
Is this correct?
The MIDI functions will not work (MIDI does not work in SheepShaver) but the rest of SD should work.
Any reason you went with 1.5 instead of Sound Designer II?
Re: Bought sound designer 1.5, but
yes OS 10.12.6
latest mac. touchbar. etc.
I know about the Midi thing. I chose 1.5 because it has it specifically supports hardware samplers . You can load up support for the Mirage and it's OS and save in the sampler format. I was going to transfer to my g4 and send over midi.
I dont know what you mean by Guest OS: Mac OS 9.0.4
I did exactly what that kid did in the video. Then I went into unix and dragged turbosynth in and installed that way.
I'll try SD one more time
latest mac. touchbar. etc.
I know about the Midi thing. I chose 1.5 because it has it specifically supports hardware samplers . You can load up support for the Mirage and it's OS and save in the sampler format. I was going to transfer to my g4 and send over midi.
I dont know what you mean by Guest OS: Mac OS 9.0.4
I did exactly what that kid did in the video. Then I went into unix and dragged turbosynth in and installed that way.
I'll try SD one more time
Re: Bought sound designer 1.5, but
Dragged the sd installer to Applications in OS 9 and get the same errors.
Re: Bought sound designer 1.5, but
Maybe it is trying to establish Midi?
Re: Bought sound designer 1.5, but
yes, Guest OS: Mac OS 9.0.4
not sure about bit rate
not sure about bit rate
Re: Bought sound designer 1.5, but
Do I need to established shared folders?
Re: Bought sound designer 1.5, but
Interesting. I have an early version of turbosynth and it also supports different samplers and has Midi support unlike the newer version im using. The older version is giving the same errors as SD!
- adespoton
- Forum All-Star
- Posts: 4277
- Joined: Fri Nov 27, 2009 5:11 am
- Location: Emaculation.com
- Contact:
Re: Bought sound designer 1.5, but
Sounds like it's an issue with trying to initialize the serial port then :\
Is 1.5 old enough that it'd run under 7.5.3? You could try it in pce/macplus which has serial support....
Is 1.5 old enough that it'd run under 7.5.3? You could try it in pce/macplus which has serial support....
Re: Bought sound designer 1.5, but
ill give it a shot. thanks
Re: Bought sound designer 1.5, but
is there a 7.5.3 w/ serial support emulation that runs in sierra OSX?
- adespoton
- Forum All-Star
- Posts: 4277
- Joined: Fri Nov 27, 2009 5:11 am
- Location: Emaculation.com
- Contact:
Re: Bought sound designer 1.5, but
pce/macplus is the only one I know of. You'll have to compile it yourself though -- the web download is the Windows build plus the source.
Re: Bought sound designer 1.5, but
I got SD working with Basilisk II and OS 7.
Works. I wonder if I got a midi interfce for the macbook I could pass midi info.
Only negative is the mouse is a bit sluggish.
Even the old turbosynth works
Works. I wonder if I got a midi interfce for the macbook I could pass midi info.
Only negative is the mouse is a bit sluggish.
Even the old turbosynth works
Re: Bought sound designer 1.5, but
As SSW 7 seems to be the way to go, you might try SheepShaver with SSW 7.5.3 too.
There is a bootable image here: http://macintoshgarden.org/apps/macos-753-emulators
SheepShaver is way faster but is sharing the same limitation regarding MIDI.
There is no support for MIDI in the source code since their common ancestor ShapeShifter for Amiga.
FusionPC for DOS has basic MIDI support.
Alas Fusion needs some kind of DOS host and configuring MIDI in DOS plus routing to your MIDI box looks like a nightmare to me.
In theory some SCSI to MIDI solution may be possible as Fusion supports SCSI flawlessly.
Basilisk Build 142 for PC does support SCSi too, just a thought and a really long shot either way.
There is a bootable image here: http://macintoshgarden.org/apps/macos-753-emulators
SheepShaver is way faster but is sharing the same limitation regarding MIDI.
There is no support for MIDI in the source code since their common ancestor ShapeShifter for Amiga.
FusionPC for DOS has basic MIDI support.
Alas Fusion needs some kind of DOS host and configuring MIDI in DOS plus routing to your MIDI box looks like a nightmare to me.
In theory some SCSI to MIDI solution may be possible as Fusion supports SCSI flawlessly.
Basilisk Build 142 for PC does support SCSi too, just a thought and a really long shot either way.
Re: Bought sound designer 1.5, but
I have a g4 with a midi card. And SSD drive. Runs great. I just thought it oul be cool to put everything on a macbook.
SD on the G4 is giving me an error though..
"There is no unlocked disk which can hold a backup file."
Thanks for all he help. Its all a learning experience
SD on the G4 is giving me an error though..
"There is no unlocked disk which can hold a backup file."
Thanks for all he help. Its all a learning experience