SheepShaver builds for Mac OS X, links and downloads

[Ronald P. Regensburg]

Currently recommended SheepShaver builds for MacOSX/OSX/macOS:

Version and build history:
See https://www.emaculation.com/sheepshaver ... istory.txt
(You may need to reload that page to see the latest version of the build history.)

Version 2.5, 22 September 2020, 64-bit only, notarized from github.com/kanjitalk755/macemu source
For macOS 10.13 (High Sierra) through macOS 10.15 (Catalina)
Download: https://www.emaculation.com/sheepshaver ... 200922.zip

This build:
- Adds two advanced features (See setup manual for information):
Option to enlarge the window while preserving guest screen resolution
Option to pass on guest gamma settings to the host

If you have an existing SheepShaver setup, you can simply replace the application with the new application.
If you use an older keycodes file, you will also need to replace that file with this new one: http://ronaldpr.home.xs4all.nl/sheepsha ... ycodes.zip

For a new setup, also download the SheepShaver folder: https://www.emaculation.com/sheepshaver ... folder.zip
For more information see the revised setup manual: https://www.emaculation.com/doku.php/sh ... os_x_setup

Version 2.5, 4 May 2019, 64-bit only from github.com/kanjitalk755/macemu source
For Intel Mac, MacOSX 10.7 (Lion) through macOS 10.12 (Sierra)
Download: http://ronaldpr.home.xs4all.nl/sheepsha ... 190504.zip

If you have an existing SheepShaver setup, you can simply replace the application with the new application.
If you use an older keycodes file, you will also need to replace that file with this new one: http://ronaldpr.home.xs4all.nl/sheepsha ... ycodes.zip

For a new setup, also download the SheepShaver folder: http://ronaldpr.home.xs4all.nl/sheepsha ... folder.zip
For more information see the revised setup manual: https://www.emaculation.com/doku.php/sh ... os_x_setup

Version 2.4, 9 July 2018, 32-bit only from github.com/cebix/macemu source
For Intel Mac, MacOSX 10.4 (Tiger) through MacOSX 10.6 (Snow Leopard)
Download: http://ronaldpr.home.xs4all.nl/sheepsha ... 180709.zip

If you have an existing SheepShaver setup, you can simply replace the application with the new application.

For a new setup, also download the SheepShaver folder: http://ronaldpr.home.xs4all.nl/sheepsha ... folder.zip
For more information see the revised setup manual: https://www.emaculation.com/doku.php/sh ... os_x_setup

Version 2.4, 1 February 2014 from github.com/cebix/macemu source
For PPC Mac, MacOSX 10.4 (Tiger) and later
Download: http://ronaldpr.home.xs4all.nl/sheepsha ... 140201.zip

If you have an existing SheepShaver setup, you can simply replace the application with the new application.

For more information see the revised setup manual: https://www.emaculation.com/doku.php/sh ... _setup_old


Installation and setup (All builds/versions)
If you have an existing SheepShaver setup, you can simply replace the application with the new application.
If you set up SheepShaver for the first time, you will also need a compatible ROM file and a retail MacOS install CD (or an install CD disk image).
For other than US English keyboard layouts a keycodes file is needed.
The SheepShaver Scripts can be used to delete the prefs and nvram files to be able to start a new setup from scratch.

Setup manual
See the setup manual for more information.
July 2018 and later builds for Intel Macs: https://www.emaculation.com/doku.php/sh ... os_x_setup
February 2014 build for PPC Macs: https://www.emaculation.com/doku.php/sh ... _setup_old

Known issues
July 2018 and later builds for Intel Macs: https://www.emaculation.com/doku.php/sh ... own_issues
February 2014 build for PPC Macs: https://www.emaculation.com/doku.php/sh ... own_issues

[Ronald P. Regensburg]

Rewritten with new recommended builds.

Note that also the setup guides are revised with new information.

[Ronald P. Regensburg]

Posted the 6 October 2019 notarized build by emendelson (many thanks!) that should run in Catalina.

[Ronald P. Regensburg]

Posted the 11 October 2019 notarized build by emendelson (many thanks!) that now uses SDL2 version 2.0.10.

[Ronald P. Regensburg]

Posted the 18 October 2019 build, again with SDL2 2.0.9, because the SDL2 2.0.10 build had a serious CapsLock issue.

[Ronald P. Regensburg]

Posted the 4 December 2019 build.
Again with SDL2 2.0.10, now with CaspLock issue solved.
Disturbing message in Catalina "would like to receive keystrokes from any application" solved.

[Ronald P. Regensburg]

Posted 12 January 2020 build, recommended for macOS 10.13 (High Sierra) through macOS 10.15 (Catalina)/

'Unix' shared folder issue (loss of file resource forks) with APFS file system on host solved.

[Ronald P. Regensburg]

Posted the 8 March 2020 build, recommended for macOS 10.13 (High Sierra) through 10.15 (Catalina).

This build now has etherhelper support.
See also this topics: https://www.emaculation.com/forum/viewt ... f=6&t=8067
and discussion here: https://www.emaculation.com/forum/viewt ... 477#p65477

[Ronald P. Regensburg]

Posted the 15 March build to replace the 8 March build that appeared to be faulty.

[Ronald P. Regensburg]

Posted the 26 July build that solves the black screen freeze at full screen launch.

[Ronald P. Regensburg]

Posted the 10 August build that solves the crash at shutdown that was introduced in the 26 July build.

[Ronald P. Regensburg]

Posted the 22 September 2020 build that adds two new advanced features;
- Option to enlarge the window while preserving guest screen resolution.
- Option to pass on guest gamma settings to the host
See setup manual for more information on advanced features.