Qemu package and guide for OSX available

[Cat_7]

Hi,

Here are some qemu-system-ppc builds for MacOS hosts.
The status of running various guests is recorded here: https://docs.google.com/spreadsheets/d/ ... edit#gid=0
See the next post for some experimental builds (including sound-enabled builds).

Builds from the official source are available here:

24-11-2023
Qemu-system-ppc-macOS-Intel-24-11-2023.zip
https://surfdrive.surf.nl/files/index.p ... N/download
Use it with this guide: http://www.emaculation.com/doku.php/ppc ... mu-for-osx
Note: Built for Intel CPU/runs in Rosetta

10-10-2023
Qemu-system-ppc-macOS-Intel-10-10.2023.zip
https://surfdrive.surf.nl/files/index.p ... E/download

22-08-2023
Qemu-system-ppc-8.1-macOS_Intel-22-08-2023.zip
https://surfdrive.surf.nl/files/index.p ... 9/download

26-03-2023
Qemu-system-ppc-8.0-macOS-Intel-26-03-2023.zip
https://surfdrive.surf.nl/files/index.p ... o/download
Note: Built for Intel CPU/runs in Rosetta

14-12-2022
Qemu-system-ppc-7.2-macOS-14-12-2022.zip
https://surfdrive.surf.nl/files/index.p ... n/download
Fixes: Qemu can now run with either cocoa, sdl or gtk graphical interface. It is required to set -display to either "cocoa", "sdl" or "gtk" (without the quotes) on your command line.

18-08-2022
Qemu-system-ppc-macOS-7.1-RC3-18-08-2022.zip
https://surfdrive.surf.nl/files/index.p ... D/download
Fixes issue when switching colour depths.

22-05-2022
Qemu-system-ppc-macOS-7.1-pre-22-05-2022
https://surfdrive.surf.nl/files/index.p ... 5/download
Noticeable improvement: Qemu now adds VMNet networking functionality on Big Sur, Monterey and newer hosts. This can provide full access to the host network, replacing the non-functional tap networking on these hosts.
Example command line addition: -device sungem,netdev=network01 -netdev vmnet-bridged,id=network01,ifname=name-of-the-host-network-device
(You can find the name of the host network device in the system report under networking. This will often be “en0” or “en1”)
Note: when using this option, Qemu has to be run as root
Note: when running on Monterey you might need to copy the downloaded folder into your Applications folder.


01-12-2021
Qemu-system-ppc-macOS-6.2-rc3-01-12-2021.zip
https://surfdrive.surf.nl/files/index.p ... u/download
Note: when running on Monterey you might need to copy the downloaded folder into your Applications folder.

Qemu-5.2-OSX-12-12-2020.zip
https://surfdrive.surf.nl/files/index.p ... m/download
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina/Big Sur
Noticeable improvement: supports a serial connection over USB.
For Mac OS 9.x a FTDI driver is needed from: https://www.ftdichip.com/Drivers/VCP.htm (download the 1.0f4 version)
In the qemu.command file add -device usb-serial,chardev=cons -chardev console,id=cons (id can be anything, but id= and chardev= have to match)

Qemu-5.1-OSX-01-10-2020.zip
https://surfdrive.surf.nl/files/index.p ... X/download
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina.

Qemu-4.2-OSX-Catalina-21-12-2019.zip
https://surfdrive.surf.nl/files/index.p ... 0/download
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina.

23-08-2019
Qemu-4.1-OSX-23-08-2019.zip
https://surfdrive.surf.nl/files/index.p ... 4/download

Builds below are no longer available:

24-04-2019
Qemu-4.0-OSX-24-04-2019.zip

Should run on El Capitan and higher. Now supports the command line option -device VGA,edid=on (provides additional resolutions in the guest).


25-12-2018
Qemu-3.1-OSX-25-12-2018.zip


14-08-2018
Qemu-3.0.0-OSX-14-08-2018.zip
Should run on El Capitan and higher. No sound support, as that is still experimental.
Build from source for Qemu 3.0. Not much news regarding PPC emulation, but some speed up in disk performance might be noticed. Perhaps someone didn't like the sound of Qemu 2.13, so we were bumped to version 3.0.0.

24-04-2018
Build from Qemu 2.12 final code. Compatible with El Capitan and upwards.
Please note the inclusion of the pc-bios folder, which requires the -L pc-bios parameter in the command line for Qemu to find some required files such as openbios-ppc and qemu_vga.ndrv. Our guide has been updated accordingly. Also included are two scripts that can be used to run Qemu with tap networking.

05-02-2018
While not providing additional functionality to the build below, it does provide a substantial performance boost.
Compatible with El Capitan and upwards.

16-09-2017
This the first build in which the sungem network device is available from the official source of both OpenBIOS and Qemu. This allows Mac OS to see a built-in ethernet device, so the realtek drivers are no longer required.
Known issues: Mac OS 9.0.4 refuses to boot when not using usb-mouse and usb-kbd. The system profiler in Mac OS 9.0.4 crashes. OSX 10.3 doesn't see the network device as built-in but functions nevertheless.
Should be compatible from Mountain Lion upwards.

19-05-2017
Supports:
-Default networking through realtek drivers,
-Resolution switching: this build now officially supports on the fly resolution switching. The required qemu-vga.ndrv and corresponding openbios files are included. Please note there is now a new parameter in the command line:
-prom-env "vga-ndrv?=true"
By default it loads the vga driver. When set to false, it ignores the driver.
-This also means OSX 10.0 and 10.1 are now supported out of the box.
-Runs only in Sierra!


Best,
Cat_7


How to compile Qemu on macOS:
-install Xcode.
-install brew (/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homeb ... er/install)") (this will also install the xcode command line tools)
-brew install glib
-brew install pixman
-brew install libusb
-brew install pkg-config
-brew install ninja

git clone https://gitlab.com/qemu/qemu qemu-master
cd qemu-master
./configure --target-list="ppc-softmmu" --enable-slirp --enable-cocoa
make

[Cat_7]

Experimental builds. Be warned!

Note: For all sound-enabled builds: Do not set memory to 1024Mb or higher, or else sound will break. Do not turn off Virtual Memory.
When using a experimental build with sound support, make sure you always have the latest QuickTime and iTunes installed for your guest OS.

14-12-2022
Qemu-system-ppc-7.2-macOS-screamer-14-12-2022.zip
https://surfdrive.surf.nl/files/index.p ... T/download
Use it with this guide: http://www.emaculation.com/doku.php/ppc ... mu-for-osx
Fixes: Qemu can now run with either cocoa, sdl or gtk graphical interface. It is required to set -display to either "cocoa", "sdl" or "gtk" (without the quotes) in your command line.

29-05-2022
Qemu-system-ppc-macOS-7.1-pre-screamer-60hz-fpu-29-05-2022
https://surfdrive.surf.nl/files/index.p ... K/download
Qemu with sound support and 60Hz screen refresh, including fpu speed-up.
Built on Monterey, also runs on Big Sur. Best to put in the Applications folder.


10-12-2021
Qemu-system-ppc-macOS-6.2-rc4-screamer-60hz-fpu-vmnet
https://surfdrive.surf.nl/files/index.p ... 2/download
Built on Monterey, also runs on Big Sur. Best to put in the Applications folder. Supports sound, 60hz screen refresh, fpu speed-up and vmnet support.
The vmnet requires running as root, also see below.

06-12-2021
Qemu-system-ppc-macOS-6.2-rc3-60hz-fpu-vmnet-06-12-2021
https://surfdrive.surf.nl/files/index.p ... Q/download
Built from official source, but patched for 60hz screen refresh (instead of 30hz), fpu speed-up and vmnet support.
Built Monterey, but also runs on Big Sur.
Note: the vmnet option support three types of networking. However, to bridge your default network card to get full network access (with Appletalk) use to following on your command line:
-netdev vmnet-bridged,id=vmnet1,ifname=NAME_OF_YOUR_HOST_NETWORK DEVICE -device sungem,netdev=vmnet1

You can find the name of your host network device (probably en0 or en1) in the network part of your system report.


01-12-2021
Qemu-system-ppc-macOS-6.2-rc3-60hz-fpu-01-12-2021
https://surfdrive.surf.nl/files/index.p ... f/download
Built from official source, but patched for 60hz screen refresh (instead of 30hz) and fpu speed-up.
Note: when running on Monterey you might need to copy the downloaded folder into your Applications folder.

Builds below are no longer available

16-02-2021: Qemu 6.0pre with vmnet support
NOTE: Built with version 3 of a patch set using the macOS vmnet backend replacing tap networking
NOTE: Built on Catalina. The vmnet backend only supports bridging from Catalina upwards.
NOTE: For now, has to be run as root.
NOTE: Read the readme.txt for details and the qemu.command file for command line examples.

15-12-2020: Qemu 5.2 with screamer sound support and fpu speed-up
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina/Big Sur.
NOTE: These are experimental builds. This is particularly true for the fpu speed-up build as NO EXACT FPU RESULTS CAN BE GUARANTEED.
NOTE: This build will hang with Mac OS 9.0 and 9.1

20-08-2020: Qemu 5.1 with screamer sound support
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina.
NOTE: This build will hang with Mac OS 9.0 and 9.1

01-05-2020: Qemu 5.0 with screamer and Qemu 5.0 with screamer and fpu speed-up
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina.
NOTE: These are experimental builds. This is particularly true for the fpu speed-up build as NO EXACT FPU RESULTS CAN BE GUARANTEED.

11-02-2020: Qemu 4.2 with screamer sound support. Built on Sierra

10-02-2020: Qemu 4.2 with screamer sound support. Catalina only!
Be sure to read the ReadMe.txt to understand how to enable running Qemu on Catalina.

24-08-2019: Qemu with some very limited Ati Rage 128 Pro support
Be sure to read the README.

23-08-2019: Qemu 4.1 with Sound support
Built on OSX 10.12, as 10.11 failed.

08-02-2019: Qemu 4.0pre with altivec acceleration.
Note: this build was compiled on El-Capitan with clang7.
-device VGA,edid=on provides additional screen resolutions.

08-02-2019: Qemu 4.0pre with altivec acceleration and screamer audio support.
Note: this build was compiled on El-Capitan with clang7.
-device VGA,edid=on provides additional screen resolutions.


04-01-2019: Qemu 3.1 with screen resolutions through EDID info read by the vga-driver
Read the readme in the vga-driver folder.

30-10-2018: Sound support
Sound support for 9.0 to 10.5: Screamer-enabled build based on recent source.
Make sure you always have the latest QuickTime and iTunes version installed in your guest OS.

20-07-2018: MorphOS
Qemu 3.0 RC1 build for running Morphos on OSX.

[Budgiebrain994]

Thank you very much cat_7, it's looking great so far.

Just a couple things: in Windows instructions - startqemu.bat, one of the parameters is to load openbios-ppc-pcifix as the BIOS, but the one linked to download is just openbios-ppc. I changed the command to open the bundled openbios-ppc (new version from your second forum post), which resolved a QEMU crash and brought up OpenBIOS then the boot screen. You might want to edit the command line to prevent it happening to everyone.

Secondly, by running this (on OS X 10.4) I get the boot screen, with the logo and spinning wheel, but it stops spinning after about 10mins. I tried to enable verbose mode but I'm not getting it to do so (-prom-env 'boot-args=-v' seems consistent with OS X instructions, but not Windows). How do I enable verbose mode from here? I believe that perhaps the problem could be that there IS a ppc-pcifix version which you may have needed to bundle instead of the ppc version.

I'll keep waiting to see if it's just taking forever to load, and I'll keep trying to get to verbose mode running. I also may try 10.3 tomorrow. Thanks again for the astounding work

[Cat_7]

Hi,

Thanks for reporting back.

one of the parameters is to load openbios-ppc-pcifix as the BIOS

I updated the guide to reflect the need to rename the file or edit the windows batchfile to point to the correct file name.

prom-env 'boot-args=-v' seems consistent with OS X instructions, but not Windows

So it seems. Replacing all quotes with " instead of ' will allow providing arguments. Fixed in the guide.

the problem could be that there IS a ppc-pcifix version

No there isn't. The latest bios file cumulatively adds all previous fixes.

Overall, the windows version is much slower compared to the OSX version and has the nasty habit of losing mouse control. I'll check the 10.4 installation issue.
Please note that the windows versions are created whenever there is a new official qemu release. The OSX versions are created when promising new developments are available. This leads to OSX versions probably having more/better functionality when compared to the windows versions.

EDIT: quotes fixed when providing arguments in Windows version. Windows version boots 10.4 CD image perfectly!

Best,
Cat_7

[Budgiebrain994]

Alright, thanks. It looks like most of these things can be avoided by using OS X instead, so I'll proceed to do so.

Edit: OS X 10.4 didn't like QEMU on OS X, so it may have been a faulty image I was using in the first place. 10.3 installed fine using QEMU on OS X, but not on Windows - lost mouse cursor through installation menus. Workaround: installed on QEMU for OS X, then moved image to QEMU for Windows. Works a charm.

Making a couple optimisations - screen size is flexible, as is RAM, no problems increasing those. I'm now looking into possibly enabling audio, or even video(!) but I'll need to look into whether PowerPC kexts even exist for any available emulated devices QEMU provides.

Super happy with the outcome so far. Thanks again Cat_7.

[Ronald P. Regensburg]

Set up this QEMU distribution in OSX 10.10.5 for installing Mac OS X 10.3.

I used Disk Utility in OSX to create disk images from the three Mac OS X 10.3 install disks in DVD/CD Master (.cdr) format.

I used qemu-img to create a 6G raw disk image for the installation target volume.

First installer image is named "10.3InstallDisc1.cdr"
Target volume image is named "Qemu10.3HD.dsk"

qemu.command:

Code: Select all

cd "$(dirname "$0")"

./qemu-system-ppc -bios ./openbios-ppc -boot d -M mac99 -m 256 -cpu G3 -prom-env 'auto-boot?=true' -prom-env 'boot-args=-v' -g 1024x768x32 -netdev user,id=network0 -device rtl8139,netdev=network0 -drive file=./10.3InstallDisc1.cdr,format=raw,media=cdrom -drive file=./Qemu10.3HD.dsk,format=raw,media=disk

When I start qemu.command, I get the QEMU window and in it:

Code: Select all

Welcome to OpenBIOS v1.1 built on Jan 4 2016 06:04
Trying cd:,\\:tbxi...
No valid state has been set by load or init-program

0 > 

Something wrong with the CD image?

[Cat_7]

Please take great care not to have additional line endings in your command file.
Did you create the image from your own disks?

Best,
Cat_7

[Ronald P. Regensburg]

The whole command is in one line, no additional line endings.

I created the images from my own install disks. They are regular retail install disks.

[Ronald P. Regensburg]

This time it works.

What did I do different?
For creating the CD image in OSX Disk Utility: The first time I selected the CD volume in the left column in Disk Utility (as I normally do) but this time I selected the CD drive.

I will report back when I did the 10.3 installation in QEMU.

[Ronald P. Regensburg]

Did a default 10.3 installation from install disks 1 and 2.

The 6GB image I created with qemu-img wouldn't work. I could partition it with Disk Utility on the install disk, but the installer labeled it with a red exclamation mark as not suitable for installation. No change after re-partitioning.

I tried various images created with Disk Utility on the 10.10.5 host OSX. The only ones that worked consistently as target volume were created with "Hard disk" as value for Partitions:

Name: QEMU10.3HD
Size: Custom... (6 GB)
Format: Mac OS Extended (Journaled)
Encryption: none
Partitions: Hard disk
Image Format: read/write disk image

[Ronald P. Regensburg]

But now another problem.

After completing the installation by configuring the new installed system and an account, I looked at my 10.3 Desktop and everything seemed OK. I shut down the emulated machine and went shopping.

Started again QEMU but now startup is stuck at the grey screen with Apple logo.

[Ronald P. Regensburg]

Installed 10.3 again. This time I left out all software that I will not use. Again everything looks OK after installation and setup. But after shutting down the emulated machine, again a new startup gets stuck at the grey screen with Apple logo.



Edit: Oops
Sorry, startup does not get stuck. It stays longer at the grey screen than I expected.

[Ronald P. Regensburg]

Internet connection works, but apparently Apply does not provide software updates for 10.3 anymore.

[mabam]

You can download the Combo update from https://support.apple.com/kb/DL496?locale=en_US manually. I'm not sure whether that includes the 'latest' security update though.

[Cat_7]

Disk image creation updated in the guide.

Thanks,
Cat_7

[adespoton]

There are a few security updates later than the combo update -- they're all available from the support downloads site: https://support.apple.com/en_US/downloads/10.3

[Ronald P. Regensburg]

Installing the combo-update proceeded fine. Now running 10.3.9.

The emulator is slow, but usable. With file sharing enabled on the host, I can access files and folders on the host from within the emulator. Will probably work also with other computers in my home network, didn't try yet. With 10.3 drivers for my Canon printer installed, I could probably print to that printer on my network. Didn't try that yet either.

Issues so far:

1. No sound (known, I suppose)

2. I accidentally chose sleep (instead of shut down) from the Apple menu and the emulator froze. No mouse cursor, no reaction on any key press.

3. For mounting CD images ("change ide1-cd0" from the Machine menu), the Open dialog only allows choosing .iso files. It should also allow choosing .cdr files.
(A .cdr file entered in the command as CD file works fine, and when I change the .cdr extension to .iso the file can be used for mounting from the Machine menu.)

[gorans]

I followed the guide, installed 10.4 and updated to 10.4.11. Had a lot of trouble with various cdr and iso images from the net until I ripped my own retail Tiger DVD and installed from there.
I lost network after update to 10.4.11.

What bothers me the most is the long wait at boot. Apple is displayed for 1-2 minutes and then boot proceeds (verbose). Also the "a" key is "pressed" when switching from host (10.10.5) and QEMU.

To sum up, for me it's usable and working but slow.

[Cat_7]

Hi,

Thank you for the feedback. Emulation is indeed slow, and loosing network support after updating to 10.4.11 is a known issue.

Best,
Cat_7

[Programmingkid]

3. For mounting CD images ("change ide1-cd0" from the Machine menu), the Open dialog only allows choosing .iso files. It should also allow choosing .cdr files.
(A .cdr file entered in the command as CD file works fine, and when I change the .cdr extension to .iso the file can be used for mounting from the Machine menu.)

I just fixed this problem today. Now you should be able to open .cdr files.

Here is the patch: https://lists.nongnu.org/archive/html/q ... 06761.html

[24bit]

These are really amazing proceedings!
Thanks Cat_7 for providing the self contained package, saving me from the dependency hell.
Thanks Ronald for posting your experience with the HD image.
Last not least thanks to all developers and contributors making this happen, I would not have believed this until seeing it with my own eyes.

I´m installing 10.3 from ISO images on a 10.10.5 C2D host right now.
Installing from ISO 1 works fine so far, but after changing boot volume to "c" it looks like nothing is happening - yellow screen for some time, than black screen endlessly.

Edit:
After removing the CD image from qemu.command it boots! Obviously I have missed that in the guide.

Now, could someone please enlighten me how to set up a shared folder?
/Classic would be my shared folder on the host, in case that matters.
Thanks again!

[kristerwirtanen]

Thanks Cat_7 for your precompiled qemu for OSX. I always been able to install Mac OS 10.3 from the Mac OSX 10.3 Install Disc1 but not with the last compile qemu_2.7-rc0-OSX from 23juli. I got so far that I can select language but then the mouse and keyboard disappears and the only thing to do is close qemu from the outside. With the emu_2.7-pre-OSX precompile from 15juli everything works OK. Maybe everything will be good in RC1. (I work on an Macbook 2010 with OSX10.11.5).

[kristerwirtanen]

I noticed in the new topic http://www.emaculation.com/forum/viewto ... =34&t=9005 that I have to spec -cpu G3 in the command line with the latest QEMU because it default to G4. So now I'm happy with no problems with MacOSX 10.3 installation.

[MetalSnake]

I'm trying to get Mac OS 9.1 running using the guide.
I'm using the Qemu 2.7-rc0 package linked in the guide and a german Mac OS 9.1 image.

Code: Select all

$ file D693-2581.img: lif file
$ crc32 36b2e15b
$ md5 c9eab03c72dc427e52d384e98701617a

When I double click it, I get an error saying it's and old image and needs to be converted

Trying to use that image in qemu with "file=D693-2581.img,format=raw,media=cdrom" gives me this:



Then I converted the image using Disk Utility using the read only option, this gave me a .dmg file

Code: Select all

$ file D693-2581-converted.dmg: Macintosh HFS Extended version 4 data last mounted by: '8.10', created: Mon Jan  8 18:21:38 2001, last modified: Tue Jan  9 05:14:30 2001, last checked: Tue Jan  9 05:11:07 2001, block size: 4096, number of blocks: 119522, free blocks: 851

trying to use that with the same parameters gives me this:



Do I need a different image file?


Host is Mac OS X 10.11.6
qemu.command:

Code: Select all

cd "$(dirname "$0")"

./qemu-system-ppc -bios ./openbios-ppc -boot d -M mac99 -m 256 -prom-env 'auto-boot?=true' -prom-env 'boot-args=-v' -g 1024x768x32 -net user -net nic,model=rtl8139 -drive file=D693-2581-converted.dmg,format=raw,media=cdrom -drive file=empty_disk.raw,format=raw,media=disk

[Cat_7]

You command line seems OK.

Please note that you need to put the disk or cdrom entry you want to boot from as first entry in the parameter list and also adjust the boot "c" or "d" setting accordingly.

I would assume your images are not OK. Why don't you try first with some sure to work images?
Look for 9.1 or 9.22 in the macintosh garden

Best,
Cat_7